For more information, please visit Non-Sparking Cutting Tools.
Non-sparking tools are those made without iron&#;that is, made from non-ferrous materials like brass, copper-nickel alloys, bronze, or copper-aluminum alloys. They may also be made of copper-beryllium alloys, but these present challenges because of the toxic nature of beryllium dust, which can be a carcinogen. Wood, plastic, and leather tools are also classed as non-sparking.
Be aware that &#;non-sparking&#; is something of a misnomer: non-sparking tools can produce &#;cold sparks&#; that don&#;t contain enough heat to cause carbon disulfide, the substance with the lowest ignition point, to catch fire. But you still may see sparks even when using non-sparking tools.
So if non-sparking tools are themselves a safety precaution, what other safety concerns could there be? Here are 5 tips for using non-sparking tools safely that may explain concerns when using tools made of non-ferrous materials:
Non-sparking wrenches, chisels, hammers, crowbars, and other non-ferrous tools are softer than tools made with iron. As a result, they may become worn more quickly. A hammer, chisel, or wrench with a worn striking surface or handle can be a hazard. Ensure you inspect your non-sparking tools before each use and send worn ones to be redressed.
It&#;s essential to keep non-sparking tools clean. Any tool can pick up dust or residue from the materials worked on, and these residues can cause sparking, even though the tool is made to avoid creating sparks.
Store non-sparking tools in an adequately cross-ventilated location to avoid moisture and dust build-up. An accumulation of dust can cause sparks and explosions in hazardous work areas where gases, vapors, or other flammable substances are present.
Acetylene reacts with copper to create explosive acetylides. Using copper in contact with acetylene in humid environments is especially hazardous as moisture increases the risk of reaction.
Different types of non-sparking tools are used for different applications. Read, re-read, and read the user manual again. Know how and where your specific tool may and may not be used safely. To use your tool safely, it&#;s also critical to understand your work environment and the composition of gases, vapors or other materials that are present, and what the user&#;s manual says about how your specific tool will react in that environment.
If you want to learn more, please visit our website Non-Sparking Tightening Tools.
These 5 tips for using non-sparking tools safely should enhance safety in the work environment. Never become complacent about using non-sparking tools: vigilance with cleanliness and attention to cross-ventilation and wear are necessary at all times.
Do you need to grind or cut metal in an EX Area? Sick of building habitats and needing to acquire Hot Work Permits?
Well look no further. Our Non-Sparking tools mean there's no more worrying about heat and sparks in EX areas!
There are many occasions where traditional grinding and cutting tools are totally unsuitable due to things such as heat and spark creation. Using a generic grinder in an EX Area could mean you're putting everyone's life on the line - not to mention risking the very existence of your facility!
Habitats are of course an option but their use is time-consuming and expensive. By the time you've acquired the necessary Hot Work Permit, set up the habitat, and carry out the actual work - you would probably rather not have to total up the time spent, and all the costs incurred.
AVL Tool and Die offers a better way. All our tools are non sparking, and air powered, and allow you to do the job quickly. No shutdown or slowdown in production. No need for committee work or frustrating delays.
Just grab the tool, get the job done and sweep up the cuttings. Safely. Quickly. Cheaply.
The company is the world’s best Non-Sparking Striking Tools supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.