Tobee® 6/4 D AH Centrifugal Slurry Pumps are ready for delivery, The total 3 sets of 6/4 slurry pumps will be used in phosphate ore.
For more AHR rubber Slurry Pump equivalentinformation, please contact us. We will provide professional answers.
6x4D-AH Rubber Lined Slurry Pump is similar to 6x4D-AH Metal Lined Slurry Pump in structure. The main difference between AH and AHR is the material of wet parts, which are natural rubber, synthetic rubber or other wear-resistant rubbers. The Rubber Lined Slurry Pumps are more suitable in delivering strong corrosive or abrasive slurries of small particle size without sharp edges.
Rubber is lighter and more flexible than other wear liner materials. This helps with installation as it is easier to lift and install quickly and efficiently; a positive outcome for the health and safety of workers on site.
Using rubber as a wear lining material means:
▪ Less downtime
▪ Longer intervals between maintenance
▪ Lower inventory
▪ Better safety
Rubber lining has been used for almost a century to protect plant and equipment from wear, and has retained its position as the preferred wear material for the pumping and separation of fine particle slurries.
Tobee® 6/4 Rubber Lined Slurry Pump with Gland Packing Photos:
Tobee® 6/4E-AHR Rubber Lined Slurry Pump is cantilevered, horizontal, centrifugal with double casing slurry pump. They are designed for the handling of highly abrasive, high-density slurries. The wet parts of 6x4 slurry pumps are made of natural rubber, which could be replaceable wear-resistant parts. The discharge side can be oriented to any of the eight different positions. The shaft seals may adopt packing gland seal, expeller seal and mechanical seal.
Design Features:
√ Bearing assembly – A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
√ Liners – Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded rubber. Elastomer seal rings back all liner joints.
√ Casing – Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
√ Impeller – Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded rubber impellers are completely interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
√ Throatbush – Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
√ One-piece frame – A very robust one-piece frame cradles the cartridge type bearing and shaft assembly. An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance.
Tobee® 6/4 E AHR Rubber Lined Slurry Pump Performance Parameters:
Model
Max. Power
(kw)
Materials
Clear water performance
Impeller
Vane No.
Liner
Impeller
Capacity Q
(m3/h)
Head H
(m)
Speed n
For more information, please visit slurry pump company news.
(rpm)
Eff. η
(%)
NPSH
(m)
6/4E-AHR
120
Rubber
Rubber
144-324
12-45
800-1350
65
3-5
5
Tobee® THR Rubber Slurry Pumps Shaft Seal Arrangement :
• Packing Seal is a general shaft seal.It applys to various pumping conditions, PTFE and Graphite materials of Packing can be used in high corrosive slurries or high temperature conditions.Using ceramic shaft sleeve,For high abrasion conditions, The ceramic shaft sleeve is available.
• Expeller seal is an impeller force of reversed centrifugal force, preventing slurry leakage. Expeller seal can be used on the single-stage pump when the positive pressure of pump inlet is no more than 10% of pump outlet pressure or on the first-stage pump in the pump series.
• Mechanical seal is advanced sealing technique without sealing leakage, integrating construction, convenient installation & replacement, various constructions suit for all kinds of conditions.
Tobee® Rubber Lined Slurry Pumps Applications:
√ Iron Ore Dressing Plant
√ Copper Concentration Plant
√ Gold Mine Concentration Plant
√ Molybdenum Concentration Plant
√ Potash Fertilizer Plant
√ Other Mineral Processing Plants
√ Alumina Industry
√ Coal Washery
√ Power Plant
√ Sand Excavation
√ Building Material Industry
√ Chemical Industry
√ Other industries
Contact information：
Email: Sales9@tobeepump.com | Mob: +86-18132079120| Skype: Tobee.Pump | Fax: +86 311-87221317
Web: www.tobeepump.com | Web: www.slurrypumpsupply.com | Web: www.tobee.cc | Web: www.hydroman.cn | Web: www.tobee.store
Contact us to discuss your requirements of tah slurry pump company. Our experienced sales team can help you identify the options that best suit your needs.