Follow along with the video below to see how to install our site as a web app on your home screen.
If you are looking for more details, kindly visit Special Tool .
Note: This feature currently requires accessing the site using the built-in Safari browser.
By default, these terminals are inactive. Connection options are a
normally closed switch, normally open switch, Call Button,
Call Switch, or EOL resistor termination.
By default these terminals provide a contact closure when the
SIP Horn Speaker is active.
A terminal block reset on the back of the unit can only be used to
reset the SIP Horn Speaker at time of power up. To reset,
reboot or power cycle the SIP Horn Speaker. Wait until the
blue LED flashes, then connect the reset terminals and hold until
the blue LED begins a double flash pattern. Release the reset
connection and allow the unit to complete its boot process. Do not
connect the reset terminals until the blue LED begins
flashing.
A reset will set all configuration options to factory default including
the password.
The company is the world’s best T Type Socket Wrench Factories supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.
Once booting has completed, connecting the reset terminals will
cause the speaker to annunciate its IP address over the speaker.
The blue LED by default will be on when the speaker is active. The
blue LED will also be on during power up and boot process.
The blue LED can also provide a heartbeat with a flash every 60
seconds to indicate that the speaker is powered and connected to the
network.
If the SIP Horn Speaker is in talkback mode the blue LED will
be flashing.
Document 90-
-12-08
Page 20
Algo Communication Products Ltd
Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
SIP Horn Speaker
(604) 454-
Contact us to discuss your requirements of Diagonal Cutter Uses. Our experienced sales team can help you identify the options that best suit your needs.