Slurry pump bearing components, also known as rotor components are part of the slurry pump components. It is an important part of the slurry pump as the transmission power unit.
Slurry pump bearing components, also known as rotor components are part of the slurry pump components. It is an important part of the slurry pump as the transmission power unit.
The bearing assembly is used to connect the pump and the motor components to form a complete working system
The stability of the slurry pump bearing assemblyslurry pump bearing assembly directly affects the operation and service life of the pump
It is used to transmit power, to withstand the working state of the force and the corresponding axial force
Make sure the impeller rotates and drives on the same axis
1, maze sets, 2, oil cups, 3, butter ring, 4 bearing body, 5, bearings, 6, adjust the pad, 7, end cover, 8, shaft, 9, 10 inch nuts, 11, end cap fastening screws
The following is the role of 11 parts:
The main role of the bearing body is to support the shaft and bearing, to ensure that the axis of rotation, to withstand the force, the working body and power connected
Bearings bear the meridional and axial force, to achieve the effective rotation of the role of different bearing components of the bearing in the slurry pump installation gap is not the same
The shaft is the center line of the pump rotation, both ends are used to connect the impeller and coupling, connect the active parts, the power to the work components
The bearing cover is used to secure and position the exact position of the shaft, adjust the bearing clearance of the bearing, and bear the axial force of the pump
Maze sets, oil cups, labyrinth rings are used to seal both ends of the bearing. One is to prevent the leakage of bearing grease, the second is to prevent the outside of the bearing body debris and sewage into the bearing, the oil cup is injected into the maze ring is a seal and lubrication
The main role of butter retaining ring is to ensure that the normal lubrication of the bearing, blocking a certain grease at the same time the excess waste oil through the butter ring and the gap between the bearing to exclude the bearing body
Adjust the pad to adjust the bearing clearance of the components, according to different components of different standards to adjust the adjustment pad are: 0.5mm, 0.3mm, 0.2mm, 0.14mm four specifications
Inch nuts are mainly driven by the drive side of the maze sets and bearings
Slurry pump bearing components in the bearing lubrication to take lithium grease to do grease
Bearing assembly installation is very important, improper installation can easily cause the slurry pump can not run the fault, or cause the slurry pump to run unstable, broken shaft, vibration and so on.
The problems and precautions when the bearing components work.
In the course of the use of bearing components prone to the following two problems; bearing temperature is too high; then the bearing components damage fast.
The reason for the high temperature:
1. Improper adjustment of bearing trainee, did not meet the assembly standards
2. Grease excess, too little or impurity
3. Improper selection of slurry pump, power is too large
Reason for damage too fast:
1. The quality of the bearing itself is not good
2. The assembly does not meet the standard, or there is dirt in the grease
In order to ensure that the bearing components to meet our work requirements, the normal operation, in use must pay attention to the following:
The degree of attention to the slurry pump should be increased. In the production of slurry pump plays an irreplaceable role, in strict accordance with the work performance, technical standards and the use of standard operations
A, in use to ensure that the external clean and dirty, not clean, improper adjustment of the shaft seal to reduce the heat performance, but also when the pump pump is not heart, improper adjustment of the belt, resulting in bearing heat, leading to premature bearing damage
B, should be regular refueling on time, clear bearing the body of oil, grease is not good, there are debris, from time to time refueling maintenance, are likely to cause poor bearing operating conditions, reduce its life
C, should reduce the vibration of the slurry pump work, so that the various parts are not loose, so as to avoid accidental reduction in service life
D, in use should pay attention to the above problems, but the most fundamental is the slurry pump manufacturers in the assembly, should be strictly in accordance with the installation of bearing components technical standards to ensure that the initial quality of bearing components
Slurry pump bearing components are the heart of the whole pump, although the value is relatively small relative to the pump, but if the installation does not meet the technical requirements, it can not guarantee the normal use of the pump, the slurry pump adversely affected, so the slag The operation of the pump:
A, to improve the operator's responsibility and appropriate technical training
B, make a corresponding operation process
C, operators and repair workers do a good job cooperation, do a good job of slurry pump use and maintenance work
D, the new pump or new bearing components, to watch the bearing temperature, to control the normal temperature operation, can not run at high temperatures for a long time, otherwise the bearing will be damaged
Slurry Pump Bearing Assembly EEAM005M is installed on 6x4 AH and 8x6 AH Slurry Pumps
Tobee® Slurry Pump Bearing Assembly are interchangeable with AH/HH/L/M slurry pump parts and designed by spatial structure CFD and impeller casting CAE, Precision casting and professional heat treatment process make the parts upto more higher hardness, Precision machining and painting technology ensure the parts are more conformable with fluidics, With strict quality control, Tobee's high chrome wear parts provide users with longer 30%-60% wear life and higher efficiency due to advanced manufacturing processes. Increasing users enjoy perfect fit and finish to reduce installation workload.
Slurry Pump bearing assembly is used to connect the slurry pump and motor parts to form a complete working system. The stability of the slurry pump bearing assembly directly affects the operation and service life of the pump. Before assembling, pre-heat the inner race of the bearing to a temperature below 120℃. The inner race must be fixed next to the shaft shoulder or grease retainer. For double row taper roller bearing, the inner ring, outer ring, and lantern ring come in a set, please do not interchange the components.
Replacement Slurry Pump Bearing Assembly Code List:
Bearing Assembly
AH Slurry Pump
Slurry Pump Bearing Brand
B005M
1.5/1B-AH, 2/1.5B-AH
ZWZ, SKF, TIMKEN Brand
C005M
3/2C-AH, 4/3C-AH
ZWZ, SKF, TIMKEN Brand
CAM005M
4/3C-AH
ZWZ, SKF, TIMKEN Brand
D005M
4/3D-AH, 6/4D-AH
ZWZ, SKF, TIMKEN Brand
DAM005M
6/4D-AH
ZWZ, SKF, TIMKEN Brand
E005M
6/4E-AH, 8/6E-AH
ZWZ, SKF, TIMKEN Brand
EAM005M
8/6E-AH
ZWZ, SKF, TIMKEN Brand
R005M
8/6R-AH
ZWZ, SKF, TIMKEN Brand
FAM005M
8/6F-AH, 10/8F-AH, 12/10F-AH
ZWZ, SKF, TIMKEN Brand
SH005M
10/8ST-AH, 12/10ST-AH, 14/12ST-AH
ZWZ, SKF, TIMKEN Brand
G005M
14/12G-AH
ZWZ, SKF, TIMKEN Brand
TH005M
16/14TU-AH, 18/16TU-AH, 20/18TU
ZWZ, SKF, TIMKEN Brand
Bearing Assembly
HH Slurry Pump
Slurry Pump Bearing Brand
CAM005M
1.5/1C-HH
ZWZ, SKF, TIMKEN Brand
DAM005M
3/2D-HH
ZWZ, SKF, TIMKEN Brand
EAM005M
4/3E-HH
ZWZ, SKF, TIMKEN Brand
FAM005M
6/4F-HH
ZWZ, SKF, TIMKEN Brand
Bearing Assembly
M Slurry Pump
Slurry Pump Bearing Brand
EAM005M
10/8E-M
ZWZ, SKF, TIMKEN Brand
R005M
10/8R-M
ZWZ, SKF, TIMKEN Brand
Bearing Assembly
L Slurry Pump
Slurry Pump Bearing Brand
ASC005M
20A-L
ZWZ, SKF, TIMKEN Brand
BSC005M
50B-L
ZWZ, SKF, TIMKEN Brand
CAM005M
75C-L
ZWZ, SKF, TIMKEN Brand
DSC005M
100D-L
ZWZ, SKF, TIMKEN Brand
ESC005M
150E-L
ZWZ, SKF, TIMKEN Brand
S005M
300S-L
ZWZ, SKF, TIMKEN Brand
Bearing Assembly
G(H) Gravel Pump
Slurry Pump Bearing Brand
DAM005M
6/4D-G
ZWZ, SKF, TIMKEN Brand
EAM005M
8/6E-G
ZWZ, SKF, TIMKEN Brand
F005M
10/8F-G
ZWZ, SKF, TIMKEN Brand
S005-3M
10/8S-G, 10/8S-GH
ZWZ, SKF, TIMKEN Brand
G005M
12/10G-G, 14/12G-G, 12/10G-GH
ZWZ, SKF, TIMKEN Brand
TH005M
16/14TU-GH
ZWZ, SKF, TIMKEN Brand
The bearing assembly is used to connect the pump and the motor components to form a complete working system
The stability of the slurry pump bearing assembly directly affects the operation and service life of the pump
It is used to transmit power, to withstand the working state of the force and the corresponding axial force
Make sure the impeller rotates and drives on the same axis
1, maze sets, 2, oil cups, 3, butter ring, 4 bearing body, 5, bearings, 6, adjust the pad, 7, end cover, 8, shaft, 9, 10 inch nuts, 11, end cap fastening screws
The following is the role of 11 parts:
The main role of the bearing body is to support the shaft and bearing, to ensure that the axis of rotation, to withstand the force, the working body and power connected
Bearings bear the meridional and axial force, to achieve the effective rotation of the role of different bearing components of the bearing in the slurry pump installation gap is not the same
The shaft is the center line of the pump rotation, both ends are used to connect the impeller and coupling, connect the active parts, the power to the work components
The bearing cover is used to secure and position the exact position of the shaft, adjust the bearing clearance of the bearing, and bear the axial force of the pump
Maze sets, oil cups, labyrinth rings are used to seal both ends of the bearing. One is to prevent the leakage of bearing grease, the second is to prevent the outside of the bearing body debris and sewage into the bearing, the oil cup is injected into the maze ring is a seal and lubrication
The main role of butter retaining ring is to ensure that the normal lubrication of the bearing, blocking a certain grease at the same time the excess waste oil through the butter ring and the gap between the bearing to exclude the bearing body
Adjust the pad to adjust the bearing clearance of the components, according to different components of different standards to adjust the adjustment pad are: 0.5mm, 0.3mm, 0.2mm, 0.14mm four specifications
Inch nuts are mainly driven by the drive side of the maze sets and bearings
Slurry pump bearing components in the bearing lubrication to take lithium grease to do grease
Bearing assembly installation is very important, improper installation can easily cause the slurry pump can not run the fault, or cause the slurry pump to run unstable, broken shaft, vibration and so on.
The problems and precautions when the bearing components work.
In the course of the use of bearing components prone to the following two problems; bearing temperature is too high; then the bearing components damage fast.
The reason for the high temperature:
1. Improper adjustment of bearing trainee, did not meet the assembly standards
2. Grease excess, too little or impurity
3. Improper selection of slurry pump, power is too large
Reason for damage too fast:
1. The quality of the bearing itself is not good
2. The assembly does not meet the standard, or there is dirt in the grease
In order to ensure that the bearing components to meet our work requirements, the normal operation, in use must pay attention to the following:
The degree of attention to the slurry pump should be increased. In the production of slurry pump plays an irreplaceable role, in strict accordance with the work performance, technical standards and the use of standard operations
A, in use to ensure that the external clean and dirty, not clean, improper adjustment of the shaft seal to reduce the heat performance, but also when the pump pump is not heart, improper adjustment of the belt, resulting in bearing heat, leading to premature bearing damage
B, should be regular refueling on time, clear bearing the body of oil, grease is not good, there are debris, from time to time refueling maintenance, are likely to cause poor bearing operating conditions, reduce its life
C, should reduce the vibration of the slurry pump work, so that the various parts are not loose, so as to avoid accidental reduction in service life
D, in use should pay attention to the above problems, but the most fundamental is the slurry pump manufacturers in the assembly, should be strictly in accordance with the installation of bearing components technical standards to ensure that the initial quality of bearing components
Slurry pump bearing components are the heart of the whole pump, although the value is relatively small relative to the pump, but if the installation does not meet the technical requirements, it can not guarantee the normal use of the pump, the slurry pump adversely affected, so the slag The operation of the pump:
A, to improve the operator's responsibility and appropriate technical training
B, make a corresponding operation process
C, operators and repair workers do a good job cooperation, do a good job of slurry pump use and maintenance work
D, the new pump or new bearing components, to watch the bearing temperature, to control the normal temperature operation, can not run at high temperatures for a long time, otherwise the bearing will be damaged
Slurry Pump Bearing Assembly EEAM005M is installed on 6x4 AH and 8x6 AH Slurry Pumps
Tobee® Slurry Pump Bearing Assembly are interchangeable with AH/HH/L/M slurry pump parts and designed by spatial structure CFD and impeller casting CAE, Precision casting and professional heat treatment process make the parts upto more higher hardness, Precision machining and painting technology ensure the parts are more conformable with fluidics, With strict quality control, Tobee's high chrome wear parts provide users with longer 30%-60% wear life and higher efficiency due to advanced manufacturing processes. Increasing users enjoy perfect fit and finish to reduce installation workload.
Slurry Pump bearing assembly is used to connect the slurry pump and motor parts to form a complete working system. The stability of the slurry pump bearing assembly directly affects the operation and service life of the pump. Before assembling, pre-heat the inner race of the bearing to a temperature below 120℃. The inner race must be fixed next to the shaft shoulder or grease retainer. For double row taper roller bearing, the inner ring, outer ring, and lantern ring come in a set, please do not interchange the components.
Replacement Slurry Pump Bearing Assembly Code List:
Bearing Assembly
AH Slurry Pump
Slurry Pump Bearing Brand
B005M
1.5/1B-AH, 2/1.5B-AH
ZWZ, SKF, TIMKEN Brand
C005M
3/2C-AH, 4/3C-AH
ZWZ, SKF, TIMKEN Brand
CAM005M
4/3C-AH
ZWZ, SKF, TIMKEN Brand
D005M
4/3D-AH, 6/4D-AH
ZWZ, SKF, TIMKEN Brand
DAM005M
6/4D-AH
ZWZ, SKF, TIMKEN Brand
E005M
6/4E-AH, 8/6E-AH
ZWZ, SKF, TIMKEN Brand
EAM005M
8/6E-AH
ZWZ, SKF, TIMKEN Brand
R005M
8/6R-AH
ZWZ, SKF, TIMKEN Brand
FAM005M
8/6F-AH, 10/8F-AH, 12/10F-AH
ZWZ, SKF, TIMKEN Brand
SH005M
10/8ST-AH, 12/10ST-AH, 14/12ST-AH
For more information, please visit vertical centrifugal pumps.
ZWZ, SKF, TIMKEN Brand
G005M
14/12G-AH
ZWZ, SKF, TIMKEN Brand
TH005M
16/14TU-AH, 18/16TU-AH, 20/18TU
ZWZ, SKF, TIMKEN Brand
Bearing Assembly
HH Slurry Pump
Slurry Pump Bearing Brand
CAM005M
1.5/1C-HH
ZWZ, SKF, TIMKEN Brand
DAM005M
3/2D-HH
ZWZ, SKF, TIMKEN Brand
EAM005M
4/3E-HH
ZWZ, SKF, TIMKEN Brand
FAM005M
6/4F-HH
ZWZ, SKF, TIMKEN Brand
Bearing Assembly
M Slurry Pump
Slurry Pump Bearing Brand
EAM005M
10/8E-M
ZWZ, SKF, TIMKEN Brand
R005M
10/8R-M
ZWZ, SKF, TIMKEN Brand
Bearing Assembly
L Slurry Pump
Slurry Pump Bearing Brand
ASC005M
20A-L
ZWZ, SKF, TIMKEN Brand
BSC005M
50B-L
ZWZ, SKF, TIMKEN Brand
CAM005M
75C-L
ZWZ, SKF, TIMKEN Brand
DSC005M
100D-L
ZWZ, SKF, TIMKEN Brand
ESC005M
150E-L
ZWZ, SKF, TIMKEN Brand
S005M
300S-L
ZWZ, SKF, TIMKEN Brand
Bearing Assembly
G(H) Gravel Pump
Slurry Pump Bearing Brand
DAM005M
6/4D-G
ZWZ, SKF, TIMKEN Brand
EAM005M
8/6E-G
ZWZ, SKF, TIMKEN Brand
F005M
10/8F-G
ZWZ, SKF, TIMKEN Brand
S005-3M
10/8S-G, 10/8S-GH
ZWZ, SKF, TIMKEN Brand
G005M
12/10G-G, 14/12G-G, 12/10G-GH
ZWZ, SKF, TIMKEN Brand
TH005M
16/14TU-GH
ZWZ, SKF, TIMKEN Brand
Are you interested in learning more about Lined Slurry Pump? Contact us today to secure an expert consultation!