When we use SMT machine, sometimes in many places will occur some small mistakes, resulting in the entire production process will be wrong, how to correctly carry out production operations?
1. Read the substrate before production, select the substrate to be installed with the system, click "OK", read the substrate is finished, return to the main interface menu.
2. We need to adjust the distance of the next track after reading the substrate of the automatic pick and place machine. The device button of the system - handling device button - handling width: the width of the guide rail needs to be set according to the width of the substrate. Because the guide rail is used for handling the substrate, it is slightly larger than the substrate, as long as it can be handled. Set up the meter program and click OK.
3. At this point, the machine needs to be provided with the necessary material, and in SMT feeder list within the system. Fill the feeder at the creation location as prompted. First, downtime is required. In this way, after ensuring our safety, open the lid and observe the cleanliness and availability of the feeder frame. Then, if the feeder frame is clean, we can install the feeder at this time.
4. We can start production at this time. Press the button of the automatic SMT machine to turn off the emergency state when the material is just prepared, then make the servo motor of the automatic SMT machine work according to the instructions on the operation panel, and then click the next button to paste one end according to the instructions.
If you have any questions on Juki SMT Feeder, I-Pulse SMT Feeder, Fuji SMT Feeder. We will give the professional answers to your questions.