Lets talk pallet fork attachments

Re: Lets talk pallet fork attachments

If you want to learn more, please visit our website Fork Clamp Wholesaler.

Re: FVWC] #

06:10 AM

06:10 AM

Posts: 3,898
Wisconsin

Joined:Posts: 3,898

E Eagleye

trapper

Eagleye

E
Joined:
Posts: 3,898
Wisconsin

trapperJoined:Posts: 3,898

For more information, please visit double pallet forklift attachment.

Originally Posted by FVWC

Eaglets - what is that sleeve gizmo your forks are through in the pic where you&#;re lifting the bush hog?

This is useful as long as you understand the ballast requirements and loader capabilities- your loader lift arms are rated at the bucket pick not the fork fulcrum point- this why I would never have a hitch ball on one fork for trailer lifting (someone on here has been doing it for 30 years- appreciate that) with overloading you can twist the loader arms because the load isn't balance. Another caution- I looked at a lot of used tractors before buying new and everyone that came with a set of bucket forks had bucket dimples that matched- I would stay clear of bucket forks.

This is useful as long as you understand the ballast requirements and loader capabilities- your loader lift arms are rated at the bucket pick not the fork fulcrum point- this why I would never have a hitch ball on one fork for trailer lifting (someone on here has been doing it for 30 years- appreciate that) with overloading you can twist the loader arms because the load isn't balance. Another caution- I looked at a lot of used tractors before buying new and everyone that came with a set of bucket forks had bucket dimples that matched- I would stay clear of bucket forks.

 

Forklift tie down clamps are a great asset when securing loads for transport. These are sold in pairs, so the entire unit is comprised of four pieces (2 brackets, 2 clamps). An eye bracket is positioned in front of the load while the screw clamp is placed behind the unit, closest to the forklift driver. These are put in place by sliding over the forks. Simply use the preferred type of tie down such as a nylon strap or chain to secure the load (chain and strap not included).

PRODUCT DETAILS

• Uniform Capacity: 4,400 lbs. (2,200 lbs, per clamp/bracket)
• Clamps To Fit Forks: 6"W x 2-3/4"H
• Steel Construction
• Tough Baked In Powder Coated Yellow Finish

EYE BRACKET FEATURES

• OVERALL EYE BRACKET WIDTH: 8 1/4"
• OVERALL EYE BRACKET HEIGHT: 6"
• EYE BRACKET FORK OPENING: 6 1/4"W x 1 1/4"H
• EYE BRACKET LIFT OPENING: 2 1/2"W x 1 1/2"H
• EYE BRACKET THICKNESS: 1/2"

SCREW CLAMP WITH SWIVEL EYE FEATURES

If you are looking for more details, kindly visit tri lateral head unit manufacturer.

• OVERALL SCREW CLAMP WIDTH: 7 3/4"
• OVERALL SCREW CLAMP DEPTH: 2 1/2"
• MAX. USABLE HEIGHT: 2 13/16"
• MIN. USABLE HEIGHT: 1 1/4"
• EACH CLAMP INCLUDES SWIVEL EYE