The Rubber Company supply and manufacture polyethylene in a variety of colours and formats. Polyethylene is a closed cell foam, also referred to as a PE foam or LDPE foam. The material starts off as a thermoplastic which is then blown into a foam format. This is a highly durable as well as versatile product.
If you are looking for more details, kindly visit TEPAI.
The high compression rates that polyethylene offers enable it to maintain its resilience under repeated impact. It also gives the material excellent load bearing characteristics. The incredible versatility of this product enables you to use it in almost all applications. However, our customers often use it as; packaging, case inserts, flotation, flooring and acoustic underlay, camping mats to name but a few. The soft nature of the material makes it particularly useful in packaging applications as it is able to absorb impacts without damaging the contents of the package.
The Rubber Companies production facilities are able to convert polyethylene into a variety of formats to suit your specific requirements. We commonly get requests for polyethylene in: sheets, rolls, strips, gaskets as well as seals. We can also produce this material either plain or adhesive backed for easy installation. The polyethylene we offer is available in four densities, 18, 24, 33 and 45kg/m3. Each density has its own values so be sure to check our material spec sheet in order to ensure you get the right density for your specific requirements.
We offer a range of polyethylene foam products including gaskets, cut strips, full-length rolls, knee pads, and case inserts. Please contact us to see how we can meet your requirements.
Please fill out the following form to submit a Request for Quote to any of the following companies listed on
This article takes an in-depth look at polyethylene foams and their properties.
Read further and learn more about topics such as:
Polyethylene foam is a valuable closed-cell thermoplastic foam material. A closed-cell foam consists of tiny dense cells enclosed by its walls. The cells sit close to each other, but they are not interconnected. Hence, closed-cell foams like polyethylene foams are ideal for blocking the flow of liquids and gases. They are resistant to air, moisture, and chemical penetration. Their structure makes them stronger, denser, and more rigid than open-cell foams. Polyethylene foam remains a lightweight and flexible material despite its closed-cell structure.
Polyethylene foams are renowned for their impact resistance and high resilience, making them ideal for cushioning applications. Their low thermal conductivity also makes them effective insulating materials. These foams are soft, non-abrasive, and resistant to dust, tearing, and degradation. With excellent dimensional stability, they can endure various fabrication processes. Additionally, they possess antimicrobial properties that prevent the growth of bacteria, molds, and other microorganisms. These qualities make polyethylene foams suitable for a wide range of personal and industrial applications. Special characteristics can be enhanced by blending with chemical agents or additives and applying specific treatments.
Polyethylene foams are categorized into the following types:
In XLPE (cross-linked polyethylene) foams, the molecules are linked by molecular bonds, creating a network of interconnected carbon chains. This cross-linking results in a strong and rigid structure, making XLPE foams highly durable and resistant to chemicals, gases, and moisture. They also offer enhanced thermal and dimensional stability, as well as superior shock and vibration absorption. However, the cross-linking process renders XLPE foams non-recyclable as thermoplastics.
XLPE foams can be engineered to exhibit properties such as fire retardancy, static dissipation, or conductivity.
Cross-linking can be achieved through one of the following methods:
XLPE foams are ideal for applications requiring thicker foam sections. They are commonly used for expansion joints, gaskets, padding, insulation, orthopedic braces, and protective packaging for delicate medical equipment. Their low water permeability and high buoyancy also make them suitable for floating devices.
EPE foams are produced by heating and pressurizing polyethylene resin, blowing agents, and additives within an autoclave to form small beads. These beads are then cooled and used as raw material for injection molding. The beads are melted and injected into mold cavities. EPE foams are known for their high strength-to-weight ratio and excellent thermal resistance. Unlike XLPE foams, EPE foams are recyclable.
Extruded polyethylene foams are produced through an extrusion process that creates foams with uniform cross-sections. In this process, molten polyethylene resin and additives are forced through an extruder die to form a continuous length of foam. This continuous foam is then cooled and either rolled into coils or cut to specific thicknesses or lengths.
Polyethylene foams can be tailored to meet specific density requirements for various applications. The density of commercial polyethylene foams is influenced by the foaming method used. For example, LDPE plastics can be processed into either low-density or high-density polyethylene foams.
Low-density polyethylene foams have more voids in their cellular structure; hence, their density is relatively lower. These foams are softer and have better thermal insulating materials than high-density foams. They are also valued for their buoyancy and water resistance. However, their thickness decreases due to prolonged exposure to compressive stress. Low-density polyethylene foams are commonly used as a packaging material.
High-density polyethylene foams have smaller and thicker cellular walls. They are characterized by their high compressive and tensile strength, fatigue resistance, and low thermal shrinkage. They are more preferred than low-density foams for heavy-duty applications. They are used as sport underlays and cushions for shoes and couches.
The following stages are involved in the closed cell foaming process, observed at the molecular level:
The main raw materials used in the production of polyethylene foams include:
Polyethylene resin is the primary component in the production of polyethylene foams. The most commonly used types are low-density polyethylene (LDPE) and high-density polyethylene (HDPE) resins. LDPE foams are known for their lightweight, elasticity, water resistance, and cost-effectiveness. In contrast, HDPE foams offer greater strength and durability. During the foam production process, these resins are melted and combined with agents and additives that alter the original properties of polyethylene.
A blowing agent is crucial for providing the gas necessary to create fine cellular structures within the polyethylene matrix. Blowing agents are classified into two categories: chemical and physical blowing agents:
Chemical blowing agents liberate the gas needed for the foaming process through thermal decomposition or a chemical reaction of a reactive blowing agent. The gas is unreactive with the polyethylene matrix. Reactive blowing agents may exhibit an endothermic or exothermic reaction and usually produce nitrogen or carbon dioxide gas.
Organic blowing agents are known to enhance the foaming process because they constantly produce dispersible gas. They also make uniformly-sized bubbles.
For more PE Foam Extruderinformation, please contact us. We will provide professional answers.
Some examples of chemical blowing agents are azodicarbonamide (exothermic), sodium bicarbonate (endothermic), zinc carbonate (endothermic), and acylhydrazide (thermal decomposition).
The common thermoplastic foaming techniques used in the production of polyethylene foams include:
Batch foaming is ideal for small production runs and for testing new foam formulations that may not be feasible with continuous foaming systems. Typically conducted in an autoclave and a series of thermal baths, batch foaming is generally less costly and quicker to set up.
Batch foaming can be classified into two types based on the induction method:
In pressure-induced batch foaming, molten polyethylene resin is saturated with a blowing agent inside a high-pressure autoclave. After saturation, the pressure is quickly reduced to atmospheric levels by opening the vessel's relief valve. This rapid drop in pressure triggers cell nucleation and growth. The foam then expands to a desired volume and is cooled either by air or a solvent to stabilize the cells.
In temperature-induced batch foaming, the gas dissolution phase occurs in a high-pressure autoclave (2-5 MPa) at lower temperatures (10-25°C). After gas saturation, the polyethylene sample is removed from the autoclave and immersed in a hot bath of oil, water, or glycerin (80-150°C) for a specified time. The high-temperature fluid causes cell nucleation and growth. The foam expands to the desired volume while in the hot bath. Finally, the foam is quenched in cold water or a solvent bath to stabilize the cells.
Foam extrusion is a continuous process used to produce foams with a uniform cross-section, such as sheets, rods, and tubes. In this process, polyethylene pellets and additives are fed from a hopper into the barrel of a foam extruder, which has multiple heating zones. The blowing agent is introduced into the molten polyethylene either at the hopper or at a specific point in the barrel. As the polyethylene resin melts inside the barrel, the extruder screw applies high pressure to push the melt through the barrel and out of the extruder die. The sudden pressure drop as the melt exits the die causes cell nucleation and growth. The screw speed, discharge rate, and barrel temperatures are carefully controlled to achieve optimal results. After cell formation, the foam is cooled, stabilized, and then processed further, such as by cutting.
Foam extrusion is ideal for large-scale production runs.
Foam extrusion can be classified as either a physical or a chemical foaming process, depending on the type of blowing agent used:
Foam injection molding is a large-scale, batch-mode foaming process. Similar to foam extruders, a foam injection molding machine features a barrel with heating zones, a reciprocating screw, and mechanisms for feeding the resin and blowing agent. The blowing agent is introduced into the polyethylene melt either at the hopper (for chemical blowing agents) or at a specific point in the barrel (for physical blowing agents). The melt is injected with sufficient pressure and speed until it reaches the nozzle. Upon exiting the nozzle, the melt undergoes a sudden pressure drop, triggering cell nucleation and growth as it fills the mold cavities. The foam expands to fit the mold, remains in place for a specified time, and is then removed when the mold halves are opened. Any excess material around the foam product is trimmed off. This process is repeated to meet production demands.
Foam injection molding allows for the production of foams with complex shapes and precise dimensions, though it can involve significant costs for tooling and energy.
A variety of machines are used to produce polyethylene foam, which is essential for numerous applications such as packaging, insulation, cushioning, and buoyancy due to its lightweight, insulating, and shock-absorbing qualities. Below, we explore several prominent brands of machines employed in the production of polyethylene foam across the United States and Canada:
Zotefoams provides AZOTE® Foam Extrusion Systems, which are engineered for producing polyethylene foam. These systems feature cutting-edge extrusion technology, accurate temperature control, and the ability to customize foam formulations.
EPE Foam focuses on producing machines for polyethylene foam manufacturing. Their range of models is designed for high-speed production, dependable cutting systems, and the capability to create foams with varying densities.
Polycraftpuf Machine Pvt. Ltd. provides polyethylene foam machinery that supports efficient production, encompassing foam extrusion, shaping, and cutting processes. Their machines offer customizable options for foam thicknesses and densities.
MuCell Extrusion specializes in microcellular foam extrusion systems suitable for a range of materials, including polyethylene foam. Their systems provide advantages like reduced weight, enhanced mechanical properties, and improved surface finish.
Foam Supplies Inc. presents the FSI Ecomate® Foam Systems tailored for the production of polyethylene foam. These systems deliver accurate control over foam density, allow for formulation customization, and use eco-friendly blowing agents to ensure both effective and sustainable foam manufacturing.
Here are examples of products made from or utilizing polyethylene foam:
Polyethylene foam insulation serves as an effective barrier against temperature fluctuations, known for its exceptional flexibility, durability, and resistance to corrosion, weathering, moisture, and damage. Often laminated with aluminum foil, these foams enhance heat reflectivity and longevity. They are also beneficial for vibration and sound insulation. Thanks to their pliability and low density, polyethylene foams are easily installed in various applications such as roofs, ceilings, walls, floors, and pipes. Adhesive-backed insulation foams simplify the installation process. Additionally, commercially available options include fire-retardant polyethylene foam insulation.
Polyethylene foam insulation isn't just used in homes and structures; it's also commonly applied in pipes, refrigerators, and insulated containers.
Anti-static polyethylene foams prevent the build-up of static electricity on electronic devices and protect them from electrostatic discharge. They provide cushioning and minimize the effects of shock and vibration during transportation and handling. They also protect the device from moisture, heat, and accidental spills. Hence, they are ideal for packaging electronic and semiconductor devices. Anti-static polyethylene foams are typically pink in color and available in sheet form.
Polyethylene foam sheets can be utilized as a backing for adhesive films in various types of tapes. These foam tapes come in single-sided and double-sided variations. Single-sided foam tapes feature an adhesive layer on one side of the foam and are commonly used for gaskets, cushioning, packaging, and insulation. Conversely, double-sided foam tapes have adhesive on both sides of the foam sheet, making them ideal for mounting and bonding tasks. Available in different thicknesses and softness levels, polyethylene foam tapes offer greater durability compared to those made with plastic film or paper backings. They are extensively used in HVAC systems, residential settings, and commercial buildings.
Polyethylene foams, similar to wood and paper, are inherently flammable. To enhance their fire resistance, they are often treated with antimony oxide combined with halogen or phosphorus-based systems. Nevertheless, the use of halogens raises environmental and health issues, as these substances can produce significant amounts of toxic fumes.
In response, new techniques and halogen-free additives are being explored to improve the fire resistance of polyethylene foams. Research is ongoing into alternatives like magnesium hydroxide, which could replace halogen-based fire retardants. Additionally, advancements in high-temperature melting, chemical cross-linking, and mold processing are being pursued to create a fire-resistant, low-density polyethylene foam combined with ethylene-vinyl acetate.
Polyethylene foam sheets can be laminated with other materials to create thicker layers. This lamination process enhances the mechanical strength, cushioning effect, insulation properties, and overall durability of the foam.
Polyethylene foams can provide comfort and enhance ergonomics. They can be used as padding and cushioning for chairs, couches, beds, car seats, arm and headrests, and other furniture. However, open-cell foams are softer and more comfortable than polyethylene foams.
Polyethylene foams are characterized by their excellent buoyancy and minimal water absorption. These properties make them well-suited for flotation devices like swim noodles, life vests, and buoyancy aids. Additionally, they are commonly used as padding underneath backpack straps.
If you are looking for more details, kindly visit Water Bottle Blowing Machine.