To contact our Urgent Weekend/Holiday Fulfillment team please call 203-635- or 866-480- , select option 2 when prompted. For urgent weekend fulfillment we are able to offer same day, next day, expedited pickup and delivery in many cases ($300 Expedite Fee Applies).
X-Spark Product Page
This service is for urgent fulfillment only, for all other inquiries please contact our team during normal business hours or fill out one of our forms and we will get back to you within 1 business day.
Shipping times are not guaranteed. This service applies to customers in the lower 48 United States, for other locations please call for expedite estimates. If there is no answer, please leave a message with your name and number and we will return your call.
Product Description
The SFH-W Williams Straight Pattern Box End Striking Wrench 1-5/8 / 41MM comes with the Williams Industrial Brands Limited lifetime warranty.
Striking Wrench 1-5/8" / 41MM
Features
- Striking face wrenches are designed to be struck by a hammer on the anvil area in order to loosen frozen fasteners or to set and tighten fasteners
- Anvils are proportional to opening sizes. Special heat treating provides maximum durability for long life
- Straight handle design resists springing while allowing the fastener to turn more easily
- Williams expanded line of offset striking face wrenches, up to 4-5/8", provides the most extensive line on the market
- Specifically engineered to hold up under the most rigorous industrial use
- Size (Inches) : 1 5/8
- Size (MM) : 41
- Overall Length (Inches) : 7 27/32
- Box End Diameter (Inches) : 2 21/32
- Box End Thickness (Inches) : 1 5/32
- Country of Origin : USA
Warranty
Williams Warranty Information
Williams Warranty Safety Hand tools are generally designed to perform one function do not use them improperly. Screwdrivers are not chisels, adjustables are not hammers and pliers are not intended to replace wrenches. Each of our product groups contains specific safety tips for proper tool usage. Additionally, wear appropriate clothing for the job, and always wear safety glasses. A special note on safety and use of hand sockets (chrome finish) with power drive (impact) equipment is a misuse of the tool and can result in serious injury.
Trademarks The following are trademarks of either Snap-on Technologies, Inc. or Williams in the United States, and some are registered in other countries. All other Williams trademarks, service marks, domain names, logos, and company names referred to in this catalog are either trademarks, registered trademarks, service marks, domain names, logos, company names of or are otherwise the property of Snap-on Technologies, Inc. or its affiliates. In countries where any of the Snap-on trademarks, service marks, domain names, logos and company names are not registered, Snap-on Technologies, Inc. claims other rights associated with unregistered trademarks, service marks, domain names, logos, and company names. Other product or company names referred to in this catalog may be trademarks of their respective owners. Williams® CDI Torque Products® Bahco ® SUPERTORQUE® Wms.® SUPER-WMS® SUPERECTOR® PALMSTER® SUPERADJUSTABLE® SUPERBLACK® PHILLIPS® SUPERCOMBO® TORX® SUPERSOCKET® POZIDRIV® SUPERRATCHET® ROBERTSON® SUPERRENCH®
Limited Warranty: Williams warrants that it’s products shall be free from defects in workmanship and materials for the usable life of the product. This warranty is limited to products purchased from authorized Williams distributors. Snap-on Industrial Brands, at its sole option, will repair, replace or grant a credit for product that does not comply with this warranty. The product must be returned to the Williams distributor from whom the product was purchased for warranty service. If the distributor is unavailable, the product should be returned to Williams, Jamesson Rd, Midland, GA , freight prepaid. Include a contact name, number and a return address; please do not supply a post office box. Williams, does not provide any warranty for: 1) consumable products, 2) products subjected to abnormal use, 3) normal wear and tear of products. consumable products are goods reasonably expected to be used up or damaged during use. Abnormal use includes misuse, modification, neglect or lack of maintenance.
Toolbox Warranties: All toolboxes sold under the Williams brand will be warranted for a period of one (1) year from the date of purchase against defects in materials and workmanship. Any part(s) which are determined by Williams to be defective in material or workmanship, will be, at Williams discretion, repaired, replaced, or granted a credit. Any toolboxes that are to be returned, must be done through Snap-on Industrial Brands current Return Goods Policy, be sent back freight prepaid, and accompanied with a dated copy of the purchase order.
Ratchets: Warrantable ratchets purchased new will be replaced with new ratchets. All broken ratchets must be returned to Williams, Jamesson Rd, Midland, GA with a Returned Goods Authorization number (RGA #), freight pre-paid, in order to receive credit. Field destroyed ratchets will not be eligible for credit. TO THE EXTENT ALLOWED BY APPLICABLE LAW, THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, Williams AND ITS AFFILIATED COMPANIES SHALL NOT BE LIABLE FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL COSTS OR DAMAGES INCURRED BY THE PURCHASER OR OTHERS. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or country. Williams, Warranty Information Center Jamesson Road Midland, GA Williams is a division of IDSC Holdings, LLC
Product Videos
Custom Field
Type
Straight Pattern
Are you interested in learning more about Striking Box Wrench? Contact us today to secure an expert consultation!
Finish
Black
Product Reviews
Write a Review
×
Williams
1-5/8" / 41MM Williams Straight Box End Striking Wrench - SFH-W
Rating
*
Name
*
Review Subject
*
Comments
*
If you are looking for more details, kindly visit Deck Scraper.