Check valves may be the most misunderstood valves ever invented. If you mention check valves to most plant personnel, the typical response is &#;they don&#;t work.&#; In fact, those personnel may well have taken out the internals or repiped the system to avoid utilizing check valves. In other words, these valves may be the least popular valve in use today.
If you are looking for more details, kindly visit our website.
This article will explore the basics of check valves, how they work, what types there are, how to select and install them, how to solve their problems, and why they are not always the cause of the problem.
Simply put, a check valve allows flow in one direction and automatically prevents back flow (reverse flow) when fluid in the line reverses direction. They are one of the few self-automated valves that do not require assistance to open and close. While some can be fitted with externally weighted and dampened devices for special circumstances, the majority do not have any outside assistance as found with on/off control or other valves. Unlike other valves, they continue to work even if the plant facility loses air, electricity or hydraulic pressure, or the human being that might manually cycle them.
As with other types of valves, check valves are found in a full range of sizes, materials, and end connections. The line sizes range from 1/8 inch or smaller to 50 inches and larger. They are made of bronze, cast iron, plastics, carbon steel, various grades of stainless steel and alloys such as Hastelloy, Inconel, Monel and titanium. End connections include threaded, socket weld, butt weld, flanged, grooved, wafer and insert type.
Check valves are found everywhere including in the home. If you have a sump pump in the basement, a check valve is probably in the discharge line of the pump. Outside the home, they are found in industries such as desalination, water and waste, chemical, food and beverage, geothermal, mining, oil and gas, power, pulp and paper, refining and more.
Like other valves, check valves are used with a variety of media: liquids, air, other gases, steam, condensate, and in some cases liquids with particulate or slurries. Applications include pump and compressor discharge, header lines, vacuum breakers, non-code pressure relief, steam lines, condensate lines, chemical feed pumps, cooling towers, loading racks, nitrogen purge lines, boilers, HVAC systems, utilities, pressure pumps, sump pumps, wash-down stations and injection lines.
Check valves are flow sensitive and rely on the line pressure and flow to open and close. The internal disc allows flow to pass forward, which opens the valve. The disc begins closing the valve as forward flow decreases or is reversed, depending on the design. The function or purpose of a check valve is to prevent reverse flow. Construction is normally simple with only a few components such as the body, seat, disc and cover. Depending on the design, there may be other items such as a stem, hinge pin, disc arm, spring, ball, elastomers and bearings.
Internal sealing of the check valve disc and seat relies on &#;reverse&#; line pressure as opposed to the mechanical force used for on/off control valves. Because of this, allowable seat leakage rates are greater for check valves than with on/off control valves. MSS SP-61 &#;Pressure Testing of Steel Valves,&#; published by the Manufacturers Standardization Society, is one standard used by manufacturers to perform seat and shell closure tests for check valves (as well as other valves). Factors affecting check valve seat leakage include reverse pressure, media, and what the seat material is made of (such as metal or an elastomer). Metal and PTFE seating surfaces generally will allow some leakage while elastomers such as Buna-N and Viton provide bubble-tight shutoff (zero leakage).
Because of this, elastomers should be considered for air/gas media and low-pressure sealing. Important considerations when using elastomers for such valves are service temperature and compatibility of the elastomer with the media.
Regardless of type or style of valve, the longest trouble-free service will come from valves sized for the application, not necessarily the line size. Ideally, the disc is stable against the internal stop in the open position when flowing or fully closed when no flow or checking. When these conditions are met, no chattering of the disc will occur, thereby preventing premature valve failure. Unfortunately, most check valves are selected in the same way on/off control valves are selected, by line size and the desire for the largest Cv available. This ignores the fact that unlike on/off control valves that have actuation (manual, pneumatic, hydraulic or electronic), only the flow conditions determine the internal performance of the check valve.
Check valve internals are flow sensitive, unlike on/off control valves. If there is not enough flow and pressure to fully open the check valve, trim chatter occurs inside the valve. This results in premature wear, potential for failure and a higher pressure drop than calculated.
Whenever a metal part rubs against another metal part, wear is a result. That leads to eventual failure of the component itself. A component failure can result in the valve not performing its function, which in the case of a check valve is to prevent reverse flow. In extreme cases failure could result in the component(s) escaping into the line, causing failure or nonperformance of other valves or equipment in the line.
Typically, pressure drop is calculated based on the check valve being 100% open as with on/off control valves. However, if the flow is not sufficient to achieve full open and the check valve is only partially open, the pressure drop will be higher than what&#;s calculated. This is due to the effective Cv of the valve being less than maximum when the check valve is partially open. In this situation, a large rated Cv actually becomes detrimental to the check valve (unlike with on/off control valves). This results in chattering of the disc and eventual failure. Such is not the case with some other valves. For example, with a gate valve that is fully open, the wedge is out of the flow path. Therefore, the flow through the valve does not affect the performance of the wedge whether that flow is low, medium or high.
Various types of check valves are available. Some of the more popular types are included below. All these can be used for clean media. As with other types of valves, specialty check valves can be found for unique applications. While no one type of valve is good for all applications, each has its advantages.
Taking time to contact the manufacturer to assist in selection can help you find the best fit. This is especially true if you are having problems with whatever type of check valve is presently installed.
Illustration of a typical swing check valve.
Photo Credit: All photos courtesy Check-All Valve.
Swing checks are a simple design using a disc attached to an arm that is hinged at the top of the valve (at the 12 o&#;clock position). Reverse flow and gravity assist the valve in closing. Swing checks can be used for most media and generally provide good flow capacity. They should only be installed in a horizontal flow position. This is because they will not operate properly in the vertical flow positions. They also don&#;t tend to seal well in low backpressure applications. These check valves range in size from ½ inch and smaller to 50 inches and larger, and are available with threaded, socket weld, flanged or butt weld end connections. Swing checks are typically easy to inspect and maintain. In most cases, repairs can be performed with the valve in the line. Because of their design, swing checks are not fast-closing valves due to the travel distance from full open to close. This means they are highly susceptible to water hammer issues. Most swing check valves meet ANSI B16.10 face-to-face dimensions and will permit pigging of the line. There is a variation of the swing check called the tilting disc check. However, that version does not permit line pigging.
Piston or poppet style check valves are available as inline, inclined (Y-pattern), or conventional (90 degree T-pattern) body designs. All types are considered a silent check valve style that prevent water hammer and reverse flow. It does this by using a spring-assisted disc in line with the flow that has a short travel distance, resulting in a fast-closing valve. As forward velocity begins to slow, the spring assist starts to close the disc. By the time the forward velocity reaches zero, the valve disc is closed against the seat before reverse flow can occur, preventing pressure surges in the line and thus preventing water hammer. Most designs can be installed in any position, including flow down if the proper spring is installed. Piston/poppet check valves are available from 1/4 inch to 24 inches and larger. The body design selected will determine the pressure drop; inline designs will provide the best flow performance. Piston/poppet check valves are available with multiple different end connections including threaded, flanged, weldable, etc. Special end connections are available, but you would need to consult with the check valve manufacturer. Some of these check valves can be inspected and repaired in line. Ideally, this style of check valve should only be used for clean media service with no particulate.
Illustration of inclined, y-pattern poppet style check valve.
Flange insert check valves are an extremely compact, wafer-style check valve for flanged piping. They are commonly used in-line and vary from ½ inch to 20 inches in size. This style is also considered a type of silent check that help prevent water hammer. Accordingly, they will have an internal spring that assists with closing of the valve. The flange insert check and its compact design allow it to be added to an existing system with minimum piping alteration required.
Flange insert check valve with compact wafer design.
Center guided check valves are another type of silent check valve. They are also designed to prevent water hammer as well as reverse flow. This style is similar to the piston/poppet. It also falls under MSS SP125 & 126 for specifications. They are available in flanged styles with sizes from 2 to 24 inches and sometimes larger. Similarly, this style is best suited for clean media with no particulate.
Ball check valves use a ball inside the body to control the movement of flow. This style is also considered a type of silent check. The ball is free to rotate, resulting in even wear and a wiping action between the ball and seat.
Ball-style check valve, or silent check, is useful fo viscous media applications.
This feature makes ball checks useful for viscous media. Ball checks are typically found in smaller sizes of 2 inches and less. Some designs include a spring to assist in closing and for use in 90-degree styles installed in vertical lines. Depending on the body design, pressure drops with ball types can be higher than with other types of check valves. Ball checks are available in various end connections including threaded and socket weld. Some body designs permit in-line repair/inspection.
Among the many factors to consider when selecting a check valve are material compatibility with the medium, valve pressure rating (ANSI), line size, application data (flow, design/operating conditions), installation (horizontal, flow up, or flow down), end connection, envelope dimensions (especially if replacing an existing valve to avoid pipe modifications), leakage requirements, and special requirements such as oxygen cleaning, NACE, CE Mark, etc.
There are many different check valve designs, with the oldest and most common being the swing check.
When replacing a check valve, it helps to ask the following simple questions:
Sometimes we get so busy or absorbed in other things, we forget the cause can help with the solution.
Common check valve problems include noise (water hammer), vibration/chattering, reverse flow, sticking, leakage, missing internals, component wear or damage. However, it is worth mentioning that normally the real cause is the wrong size, spring, and/or style for the check valve application. In such cases, the problem is the application, not the check valve.
Two of the most common problems with check valves are incorrect sizing or incorrect installation. Incorrect sizing comes in one of two forms. If the valve Cv is too small for the application, you would see a very high pressure drop which could lead to premature valve wear because of the high velocities involved. More commonly, if the valve Cv is too large for the application, there will not be enough pressure drop created across the check valve to fully open it. Any check valve that is not fully open has a high probability of chatter which will lead to premature valve failure. Incorrect installation involves not having the proper amount of straight pipe upstream of the check valve. Ideally a minimum of 10 pipe diameters of straight pipe upstream of the check valve is desired. This is to ensure a nice laminar flow going through the check valve. Shorter distances can cause flow turbulence and spin that can prematurely wear any style of check valve.
Examples of some other problems for check valves include reverse flow and water hammer. In both situations, a fast-closing valve is desired. Reverse flow can be costly, especially if it occurs at the discharge of a pump and the pump spins backwards. The cost to repair or replace the pump, plus the plant downtime, far exceeds the cost of installing the right check valve in the first place. With water hammer, you need a faster-closing check valve to prevent pressure surges and resulting shock waves that occur when the disc slams into the seat, sending noise, vibration and hammering sounds that can rupture pipes and damage equipment and pipe supports.
If the internals are missing or exhibiting excessive wear, two factors may be occurring. First, if the check valve selected does not have enough flow passing through to keep it against its stop, a valve with a lower Cv is needed to prevent the chatter of the internals. Second, if the check valve is used at the discharge of a reciprocating air or gas compressor, a specialty valve with a damped design or dashpot to handle high-frequency cycling is needed. Sticking can occur when scale or dirt is trapped between the disc and body bore. Leakage can happen from damage to the seat or disc or simple trash in the line. An elastomer is needed to provide zero leakage.
When installing check valves, point the flow arrow in the direction of the flow to allow the valve to perform its intended function. The flow arrow can be found on the body or tag. Make sure the valve type will work in the installed position. For example, not all check valves will work in a vertical line with flow down, nor will conventional or 90-degree T-pattern piston check valves perform in a vertical line without a spring to push the disc back into the flow path. The disc in some check valves extends into the pipeline when the valves are fully open. This could interfere with the performance of another valve bolted directly to the check valve. As we discussed earlier if possible, install the check valve a minimum of 10 pipe diameters downstream of any fitting or other piping system component that could cause turbulence. Notice, I said &#;if it&#;s possible.&#; After all, how many check valves have you seen bolted to the discharge of a pump? Many! A good source of reference for installing check and other styles of valves is MSS SP-92 &#;Valve Users Guide,&#; published by the Manufacturers Standardization Society.
Lastly, I like to compare check valves to doors &#; whether that door is to your office or home. Typically, you open your office door at the start of the day and close it at the end, which is similar to what happens when a pump is cycled on and off. However, if someone stands at your door and constantly cycles it open and closed, what could happen? In most cases, the hinge pins would fail, since they are the weak link in the operation of your door.
Check valves face a similar situation. Pins, stems, springs or other components that are constantly cycled can fail. That is why it is important to properly select check valves for their specific applications. Line size does not necessarily equal check valve size. A check valve with a high Cv in a low flow application is doomed from the start. It is not the check valve&#;s fault, it is the fault of the wrong selection for the application. The selected check valve would have worked fine in proper flow conditions. Unfortunately, the installed check valve is blamed for the failure, when in reality the culprit was the application. It is always best to review the application and service conditions with the manufacturer before purchasing a check valve to make sure the correct style and options are selected.
For more information, please visit LEFLOW.
NOAH MILLER is the worldwide applications/engineered sales manager for Check-All Valve Manufacturing Company. With the company since , he&#;s been assisting customers with proper check valve installation, check valve sizing, troubleshooting, and custom check valve designs. He regularly works with customers in the industries of oil and gas, steam, pharmaceutical, food and beverage, etc. He&#;s considered the expert on check valve capabilities and is relied upon by engineers, field personnel, and purchasers to assist them with their check valve needs.A common practice in process services is to use manual globe valves with hand wheels for regulating flow.
There are many applications where the globe valve outshines other designs, so the future is still bright for these long-time favorites of the flow control industry.
Stop check valves are vital to several industries to protect boilers and other equipment.
is the worldwide applications/engineered sales manager for Check-All Valve Manufacturing Company. With the company since , he&#;s been assisting customers with proper check valve installation, check valve sizing, troubleshooting, and custom check valve designs. He regularly works with customers in the industries of oil and gas, steam, pharmaceutical, food and beverage, etc. He&#;s considered the expert on check valve capabilities and is relied upon by engineers, field personnel, and purchasers to assist them with their check valve needs.
As a valve engineer, company executive, international valve brand agent, or valve purchasing manager, understanding the intricacies of valve bodies is essential for making informed decisions in your field. At Shanghai Thinktank Process Management Co., Ltd, our THINKTANK brand is dedicated to providing high-quality valve solutions for a variety of applications. In this comprehensive guide, we will delve into the critical aspects of valve bodies, exploring their types, functions, and applications, tailored specifically for industry professionals and decision-makers like you.
Valve bodies are the primary components of valves, responsible for regulating the flow of fluids within a pipeline. They function as the housing for internal components such as the stem, disc, and seat. Valve bodies are critical in ensuring the proper operation and sealing of a valve, thereby maintaining control over the flow, pressure, and temperature of fluids within various industrial systems.
Globe Type Control Valves PartsValve bodies can be categorized into several types based on their design and the way they control fluid flow. Some of the most common types include:
Two-way valve bodies are designed with two ports &#; an inlet and an outlet &#; for fluid to enter and exit. They are used to control the flow of fluids in a simple, direct linear way, making them suitable for various applications, including isolation and throttling.
gate valve animationThree-way valve bodies feature three ports that facilitate the transmission, mixing, or diverting of fluids. They are commonly used in systems that require precise control over fluid flow, such as heating, ventilation, and air conditioning (HVAC) systems.
three-way control valvesFour-way valve bodies have four ports that allow for more complex fluid flow control. They are often employed as plug valves or ball valves, in systems requiring the simultaneous control of multiple fluid paths, such as hydraulic systems and pneumatic systems.
ss 4-way ball valvesValve bodies are made from a variety of materials, each with unique characteristics and suitability for specific applications. Some of the most commonly used materials include:
Known for its durability and cost-effectiveness, cast iron is a popular choice for valve bodies in low-pressure applications.
This material offers improved strength and toughness compared to cast iron, making it suitable for higher-pressure applications.
With excellent corrosion resistance and high strength, stainless steel is a preferred material for valve bodies in corrosive environments or high-pressure systems.
Bronze valve bodies are commonly used in marine applications due to their resistance to seawater corrosion.
Lightweight and corrosion-resistant, plastic valve bodies are often utilized in applications where chemical resistance is a priority.
Valve bodies are integral components of various industrial systems, playing a vital role in controlling fluid flow. Some common applications include:
Valve bodies are used to regulate the flow of crude oil, natural gas, and other fluids within refineries and pipelines.
In chemical plants, valve bodies control the flow of various chemicals and solutions through a piping system, ensuring safe and efficient processing.
Valve bodies are essential in power plants, where they regulate the flow of steam, water, and other fluids vital to the generation of electricity.
In water and wastewater treatment facilities, valve bodies help regulate the flow of water and various treatment chemicals, ensuring the efficient operation of the treatment process.
Valve bodies are crucial components in heating, ventilation, and air conditioning systems, where they control the flow of air and water to maintain optimal temperature and humidity levels.
In food and beverage processing plants, valve bodies and piping are used to control the flow of ingredients, cleaning solutions, and finished products, ensuring hygiene and efficiency.
Valve bodies play a vital role in the pharmaceutical industry, where they help maintain sterile environments and control the flow of chemicals and solutions during the manufacturing process.
China Thinktank Control ValvesAs an industry professional or decision-maker, selecting the appropriate valve body for your application involves considering several factors, such as:
Determine the type of flow control needed for your application, including isolation, throttling, mixing, or diverting.
There are several types of flow control that can be achieved using valves:
Evaluate the pressure, temperature, and flow rates the valve body will be subjected to during operation.
The temperature of the fluid and the operating environment can significantly impact a valve&#;s performance and material selection. High temperatures can cause some materials to weaken or lose their elasticity, while low temperatures can make them brittle. When selecting a valve, consider the following temperature-related factors.
Pressure is another crucial operating condition that influences valve selection. Valves must be capable of handling the system&#;s maximum pressure and potential pressure fluctuations without leakage or damage. Consider the following pressure-related factors.
Flow rate requirements must also be considered when selecting a valve. The valve size, design, and flow characteristics can impact the overall efficiency and effectiveness of your system. Keep the following flow rate factors in mind.
By carefully considering the operating conditions of temperature, pressure, and flow rate, with THINKTANK&#;s expert assistance, you can select the most suitable valve for your system, ensuring optimal performance, reliability, and safety.
Ensure the valve body material is compatible with the fluid it will handle, considering factors like corrosion resistance, chemical compatibility, and temperature resistance.
Select a valve size or body that matches your pipeline size and is compatible with existing connection types. At THINKTANK, we can customize any size which customers needed.
Various valve connection types are used to join valves to pipelines or other equipment in a system. Here is a list of common valve connection types.
Flanged connections involve bolting two flanges together, with a gasket between them to create a seal. Flanges come in different sizes, pressure ratings, and face types, such as raised face, flat face, and ring-type joint.
Threaded connections use male and female threads to join valves and pipelines. These connections are common in smaller valve sizes and are typically used for low to medium pressure applications. Threaded connections can be NPT (National Pipe Thread), BSPT (British Standard Pipe Thread), or other standardized thread types.
Socket weld connections involve inserting the pipe into a valve&#;s socket and then welding them together. This connection type is generally used for small-sized valves and in high-pressure, high-temperature applications.
Butt weld connections join a valve and pipe by welding their beveled ends together. This type of connection is often used for larger valves and high-pressure, high-temperature applications, as it provides a strong, leak-proof seal.
Compression fittings use a ferrule or an O-ring to create a tight seal between the valve and pipe. These connections are typically used in smaller valve sizes and lower-pressure applications, such as instrumentation and gas lines.
Union connections allow for easy disconnection and reconnection of valves and pipes. They consist of a male and female end, which are joined using a union nut. This connection type is used in applications where frequent maintenance or replacement is necessary.
These connection types are commonly used for butterfly valves. Wafer connections are sandwiched between two flanges, while lug connections have lugs that are bolted to the flanges. Both types provide easy installation and removal of the valve from the pipeline.
These are some of the common valve connection types used in various industries and applications. The selection of the appropriate connection type depends on factors such as valve size, pressure and temperature requirements, and ease of installation and maintenance.
Consider the quality, ease of maintenance, and accessibility of the valve body within your system, as this may impact overall efficiency and longevity.
The term &#;valve body&#; refers to the main component or housing of a valve that contains the internal parts responsible for regulating fluid flow. However, if you are looking for information about the different types of valves that utilize valve bodies, here are some common types:
These valves are designed for on/off control and are used primarily for isolation purposes. They feature a wedge-shaped disc that moves vertically to control the flow of fluid.
Globe valves are used for throttling and flow regulation. They consist of a movable disc or plug that can be raised or lowered to control the fluid flow.
Ball valves use a spherical ball with a hole through its center to control fluid flow. They are popular for their quick operation and tight sealing capabilities.
These valves have a disc mounted on a rotating shaft to control fluid flow. Butterfly valves are known for their compact design and low-pressure drop.
Check valves that allow fluid flow in one direction and prevent backflow. They use various mechanisms like swing, lift, or tilting disc designs to achieve this functionality.
Plug valves use a cylindrical or conical plug with a hole through its center to control fluid flow. They are suitable for applications requiring low-pressure drop and minimal fluid trapping.
These valves use a flexible diaphragm to control fluid flow. Diaphragm valves are commonly used in applications where tight sealing and purity are essential, such as in the pharmaceutical and food industries.
Needle valves are designed for precise flow control in low-flow applications. They feature a long, tapered needle that can be adjusted to control the flow rate accurately.
These are some of the common types of valves that utilize valve bodies in their construction. Each valve type has unique characteristics and is suited for specific applications, flow control requirements, and operating conditions.
A105 is a material specification for carbon steel forgings used in components like valve bodies, flanges, and fittings. This material is designated by the American Society for Testing and Materials (ASTM) under the standard ASTM A105. A105 is suitable for high-temperature and high-pressure applications due to its excellent mechanical properties.
A105 carbon steel is primarily composed of iron, with a small percentage of carbon and other alloying elements such as manganese, phosphorus, sulfur, and silicon. The carbon content in A105 provides strength and hardness, while the other elements contribute to the material&#;s overall toughness, ductility, and weldability.
A105 valve bodies are commonly used in the oil and gas industry, power plants, and other high-pressure, high-temperature applications. This material provides good resistance to wear and fatigue, making it a reliable choice for components subjected to demanding operating conditions.
WCB is a material specification for cast carbon steel used in valve components like valve bodies, flanges, and fittings. This material is designated by the American Society for Testing and Materials (ASTM) under the standard ASTM A216 Grade WCB. WCB cast carbon steel is suitable for a variety of applications, particularly in moderate to high temperatures and pressures.
The primary constituents of WCB material are iron and carbon, with smaller amounts of alloying elements such as manganese, silicon, sulfur, and phosphorus. The combination of these elements provides WCB with a balance of strength, toughness, and ductility, making it an ideal material for valve components.
Valve bodies made from WCB material are commonly used in industries such as oil and gas, power generation, chemical processing, and water treatment. The WCB material provides good mechanical properties and resistance to wear, making it suitable for demanding environments and a wide range of operating conditions.
Raw Material ControlValve bodies are critical components in various industrial systems, responsible for controlling the flow of fluids in pipelines and ensuring the efficient operation of numerous processes. Understanding the types, materials, and applications of valve bodies is essential for selecting the right valve body for your specific needs. By considering factors such as flow control requirements, operating conditions, material compatibility, size, and connection type, you can make an informed decision and optimize the performance of your system.
With THINKTANK&#;s comprehensive range of valve solutions, you can rest assured that you&#;re choosing quality products backed by industry expertise. For different types of control valves, please click this post.
For more information, please visit cast iron wafer check valve.
THINKTANK Control Valves