Got this to make up some 28" wide 26 gauge gal. steel shields for an HVAC install. I'll just give some free advice: if you ever have a professional to install HVAC equipment, probably any professional to install any equipment, go ahead and read the installation instructions yourself and watch what they do. The city inspector knew his stuff, pointed out the screw up and was able to work out an easier solution for me - and I fixed it myself - after tidying up some of the professionals other work. Sorry for the rant.
The brake worked perfectly out of the box and is very solid. For a friends project, I was also able to bend a 1-1/2" wide X 0.090" steel straps with little strain but be sure to place the heavier stuff nearer one of the hinges to minimize distortion. Haven't bolted the brake to my bench, but rather use some c-clamps as suggested which work plenty well. Making each bend takes a bit of futzing - place the piece to be bent, place the clamping bar - which is heavy and awkward but has several convenient profiles ground into it - on your work piece at the proper setback, clap it down - I use smaller c-clamps and then just bend. Rinse, lather, repeat. I saw a writeup on another forum where someone with a similar but smaller brake first aligned the clamping bar at the desired location and then match drilled through the clamping bar into the base plate at the ends of the alignment bar to allow using some pins or bolts make repeatable placing of the bar easier when bending a lot of same thickness material. If you're going to make a habit of bending similar thickness materials, it sounds like a good mod to me.
Hisman supply professional and honest service.
Rongwin panel bender bending center adopts a full servo system.
Unlike traditional bending machines, the bending machine mold needs to be pressed down against the fixed part of the bending machine, but the bending work is completed by the blade. During the bending process, the plate The material holder fixes the plate. The blade can be bent up or down in different shapes. First, one side is bent outward, and then it is automatically bent inward. These different actions are controlled by the servo electric drive device, which can ensure the highest positioning accuracy in the bending sequence and bring the best bending effect.
Rongwin panel bender plate thickness detection system
If the actual thickness of the loaded plate exceeds the set plate thickness range, the system will generate an audible and visual alarm and immediately stop operation, effectively avoiding waste of workpieces and avoiding damage to the machine.
Work table of Rongwin panel bender
Negative pressure suction cup loading and unloading system, unique patented technology, can realize 360° free rotation, simple loading and unloading operation, greatly improving the safety of operators.
Bending center eccentric load detection system
Contact us to discuss your requirements of metal furniture panel bender. Our experienced sales team can help you identify the options that best suit your needs.
If there is a foreign object under the pressure knife or the workpiece is unqualified, causing partial load, the partial load system will give an audible and visual warning and stop operation immediately to avoid wasting the workpiece and avoiding damage to the machine.
Rongwin New Sheet Metal Bending Machine CNC Panel Bender Hot Sale Sheet Bender Application
*Food machinery, goods and household appliances
*Steel furniture, sheet metal and warehouse
*Electrical cabinet
*Steel door and frame
*Elevators and escalators
*Generators
*Hospital and laboratory equipment
*HVAC
*lighting device
Rongwin New Sheet Metal Bending Machine CNC Panel Bender Hot Sale Sheet Bender Controller
Rongwin Intelligent Bending CNC System Accuracy
Rongwin adopts a fully closed loop system, and the accuracy of all compensation parameters can be supported to 0.001 mm or 0.001 degrees.
Want more information on commercial appliances panel bender? Feel free to contact us.