This is not the question that you have to ask with our cordless drills, which is why the all-rounder 18V range tools are so popular. The T 18+3 cordless drill and the C 18 cordless drill in the ergonomic C-shape are also equipped with fully electronic torque setting, the CENTROTEC quick-change system and special attachments, a brushless motor and high-performance battery packs. That makes them a universal solution for most screwdriving and drilling applications.Many tradespeople often use maximum torque for screwdriving. With the T 18+ 3 and C 18 cordless drills, you can switch from maximum torque to a lower torque setting simply by pressing a button. "Our cordless drills feature fully electronic torque setting and shut-off. This is particularly useful for screwdriving, since it allows for a very precise adjustment of force and speed. And that is exactly what many tradespeople value, as they prefer screwdriving with high precision," explains master carpenter von dem Bussche and adds: "If screws are overtightened or screw heads are even shorn off, this is usually due to mistakenly using maximum torque for screwdriving. This damages both the screw and drill bit."
Please visit our website for more information on this topic.
Link to ehimax
There are different technologies and options in the market when it comes to torque electric screwdrivers for the assembly industry, but how do you choose the right one for your particular needs?
Here are some points to consider when evaluating the ideal screwdriver for your assembly line.
Process Needs
Target Torque &#; Probably the most important data point to consider when selecting an electric screwdriver, make sure the target torque is within the screwdrivers torque range. Constant use above 80% of the screwdrivers nominal capacity is not recommended and can wear out the motor.
Precision Level &#; Each assembly process has different quality and repeatability requirements and different technologies will allow you to reach the precision level your application need.
As a rule of thumb you can expect the following precision range for these technologies:
Clutch Control: +/- 7%
Current Control: +/- 5%
Transducerized: +/- 3%
(meaning the actual torque value will be within the percentage indicated above)
Angle Requirement &#; Some applications have specific angle requirements and not all screwdrivers have angle monitoring and control; you typically have to move into the higher end of the torque tool market in order to have this capability.
Speed Requirement &#; Some applications require specific speed levels to meet the assembly quality needs and productivity rates.
Multiple Torque Capability &#; Some applications require more than one torque to be applied during assembly, typically due to different screws being used for different parts. Rather than using multiple screwdrivers, an operator can utilize a multi-torque screwdriver that can be programmed to handle a variety of torque levels (up to 100 with Kolver's K-DUCER line).
Control/Communication/Traceability Needs
Output Signal &#; For quality and process control, some applications require output signals; some common signals are START, STOP, and OK, but more sophisticated systems can output many more.
Input Signal &#; If you need to remotely control the operation of the assembly process, make sure the screwdrivers controller has the input signals available. These signals can allow you to start & stop the screwdriver or even change programs or configurations from a PLC or PC.
Fastening Data &#; Some applications need to gather, register and export the operation data for quality control and traceability. If this is a requirement make sure your assembly system can process and export this information. Common data that can be exported is Target and Final Torque, Screw #, Program #, Angle, of course date and hour, as the screwdrivers information.
These are some important factors to consider when selecting the right torque screwdrivers for your assembly needs. However, there's many other important considerations to take into account when evaluating a purchase - ergonomics, performance, reliability, cost, and more.
If you need help identifying a product that can meet all of your requirements, you can contact us at and someone from our team will help you through the selection and implementation process.
Contact us to discuss your requirements of Torque Electric Screwdriver. Our experienced sales team can help you identify the options that best suit your needs.