11 items in this article 4 items on sale!
For more information, please visit screwdriver supplier.
Photo: H. Armstrong Roberts/ClassicStock/Getty Images
There are a lot of different kinds of screwdriver &#; at least a dozen distinct types. But, according to Justin May, of Alpers Hardware in Port Washington, New York, unless you work on cars, cell phones, or, say, in the aerospace industry, you really need to know only five of them. &#;Usually, all you really need are a couple of different sizes of flathead and Phillips screwdrivers,&#; he says. &#;Unless you do specialty work, you don&#;t need super-small bits, and you don&#;t need lots of different options.&#; Whether you&#;re buying for yourself or as a gift, here are the most useful screwdrivers for five different types of people, along with an important skill that everyone should know.
Lutz 15-in-1 Ratcheting Screwdriver
$19
Most everything handled by traditional screwdrivers can be taken care of by a single tool with interchangeable bits. This Lutz screwdriver is a favorite of Strategist senior editor Peter Martin, who learned about it from his uncle, a longtime plumber. Its 15 bits &#; including the standard flathead and Phillips, along with more specialized Robertson and Torx bits (see below), which you probably won&#;t need until you start a career in decking &#; are stored inside the handle, so you don&#;t have to carry around an extra case.
This is a ratcheting screwdriver, which means the shaft can spin freely in one direction. So if you&#;re tightening a screw, it&#;ll apply turning force as you rotate your wrist to the right, then let your wrist spin back to the left and into place for another twist &#; all without removing the screw head from the screw. Since the tip and shaft are not part of the same solid piece of metal, a tool like this isn&#;t as strong as a traditional screwdriver. But if you need a screwdriver only a few times a month (or year), this is your best option. It&#;s basically a multi-tool. As May says, it means &#;you don&#;t have to carry around a box filled with screwdrivers.&#;
$19
at Amazon$19
at Amazon
Flathead screwdrivers are iconic, but they also can be hard to get into screw heads, since you have to line up the slots perfectly, and quick to slip out once you do. They&#;ve mostly been replaced by Phillips head screwdrivers, which have tips that look like an X. Those get more grip on a screwhead and almost funnel the screwdriver into the correct position. Still, if you&#;re going to be changing light switches or outlets, you&#;ll need a flathead screwdriver to remove the plastic faceplates. For nearly everything else, like mounting that coat hook to the wall or attaching the hardware to hang a heavy mirror, you&#;ll want a Phillips head.
If you&#;ve ever assembled a Hemnes bed or Billy bookcase, you&#;re familiar with hex-head screws, which require Allen wrenches, also known as hex keys. Furniture makers like these because they sit deep inside the screwhead for a better grip, which allows you to more easily make tight connections necessary to attach, say, the legs of a couch. Also, Allen wrenches are small and inexpensive to make, so manufacturers like IKEA can include them in the box, reassuring buyers that they&#;ll definitely have the tools they&#;ll need for assembly. That small size and weight is also what makes Allen wrenches good bike tools. They make tight connections and can be thrown in your bag without weighing you down.
AmazonBasics Hex Key Allen Wrench Set
$16
Hex keys can be annoying to use, in that you have to line the key up perfectly perpendicular with the screwhead. But this affordable set, which comes with both metric and standard sizes, has rounded tips, a feature that lets you insert the wrench into the screw head at a slight angle. That can be especially nice in tight spaces.
$16
at Amazon$16
at AmazonPark Tool 3-Way Hex Wrench
$15
One (deserved) knock on Allen wrenches is that, without handles, they are uncomfortable and can dig into your hands. Bicycle-equipment company Park Tool solved that problem with an actually comfortable (and grip-able) Y-shaped wrench, which includes 4mm, 5mm, and 6mm hex-head drivers &#; three of the most common sizes.
If you are looking for more details, kindly visit tape measure manufacture.
$15
at Amazon$15
at Amazon
Both Torx (star-shaped) and Robertson (square-shaped) screwdrivers and screws are made to resist cam-out, the frustrating thing that happens when your screwdriver head slips out of the screw. If you&#;re building fine furniture, cam-outs can be more than just frustrating. They can scar your wood. Both types, like Phillips head, are self-centering: As you push the screwdriver into the screw, it&#;s easy to slip into place. And they get a good grip on the screw, which is important when you&#;re working with dense wood. For either type of screwdriver, &#;There&#;s not a universal fit,&#; says May, &#;so you&#;ll need to get a set.&#;
Black & Decker 10-piece Screwdriver Bit Set
$25
If you already have a drill, you basically have a screwdriver. Many drills come with different screwdriver heads that fit into the chuck (the clamping mouth that holds the drill bit), but if yours didn&#;t, this $5 bit set includes ten different screwheads. Just remember that drills are more powerful, so it&#;s easy to accidentally strip the head of a screw when you don&#;t stop the drill in time and over sink the screw. (See below for how to fix that problem, should it happen.)
$25
at Amazon$25
at Amazon
When you tighten a screw too much, or use the wrong size screwdriver, you run the risk of stripping the head of the screw. At that point, the screwdriver can no longer catch and turn the screw, and the screw gets stuck. The best way to fix this situation is to avoid it in the first place: If you sense a screw getting worn down, remove and replace it before it&#;s too late. But if it&#;s already too late, there are a few things to do.
First, try using a larger screwdriver to bite into the head of the screw. In some cases, a flathead bit can be used to twist out a Phillips screw. (Don&#;t try using a Torx to remove a stripped Phillips. It will strip the screw worse and may actually grind down the bit, too.) For a hopelessly stripped screw, May recommends a screw extractor.
Actually good deals, smart shopping advice, and exclusive discounts.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
The Strategist is designed to surface the most useful, expert recommendations for things to buy across the vast e-commerce landscape. Some of our latest conquests include the best acne treatments, rolling luggage, pillows for side sleepers, natural anxiety remedies, and bath towels. We update links when possible, but note that deals can expire and all prices are subject to change.
Hey Nathan,
I have both brands and have never broke a tip. In the A-D Wera brand, I have individual screw drivers, so that could be a difference. On the single insulated Wiha brand with interchangeable tips, never broke one either. I bought a set of Bondhus tips to go with this as well.
One thing I find out is people don't use the correct screwdriver/bit for the task at hand. The slots in screws for electrical devices are a tad all over the place, and being lazy like some people, you never select the correct tool for the job. Easy to break something or break the device. Both have happened with the new guys.
For more best professional socket setinformation, please contact us. We will provide professional answers.