There comes a time in every driller&#;s life when a new rig has to be bought. It&#;s time to start looking when the cost to keep the old rig running negatively affects revenue, you don&#;t have enough rigs or the right kind to meet customer demand, your business is expanding into new drilling markets, or you&#;re building a brand new business altogether. Finding the right rig to drill with is easier said than done, so
Link to TongShun
National Drillerreached out to industry experts for advice on rig buying in our most popular markets. They touched on when to buy new, used or lease, and what qualities to look for in a drilling rig.
National Driller
Article Index:
When you&#;re drilling wells for water, location is everything. Generally speaking, &#;East and west of the Mississippi the demands on a rig change drastically,&#; says Brock Yordy, product manager and drill trainer for GEFCO, an Astec Industries Company.
In Michigan, for example, he says the average water well is quite shallow, around 120 feet down, whereas a lot of the western United States consists of rock and it isn&#;t uncommon to have to drill to depths of more than 6,000 feet to reach water. Taking that into consideration, looking into a used water well rig for work in the Midwest is totally sensible. Head west and the stress on a rig increases, meaning buying new could be a worthwhile investment.
Although going brand new can cost more than $1 million easily, the perks can be especially useful for rigs that deal with tough geologies and experience high rates of wear and tear. &#;You have a warranty on it and so your cost of ownership other than the monthly payment is pretty much capped. And even once the warranty expires, your cost of maintenance for the first five years on a new machine is relatively low,&#; says Tom Moffitt, business development manager of Atlas Copco Drilling Solutions, Deep Hole in the U.S.
As for leasing, Moffitt says a lot of people in the water well market confuse it with renting. He hears from drillers wanting to &#;lease&#; a drilling rig for just six months, making it hard to find a financial institution to help finance. Another point he makes is that truck mounted drills have to be licensed and titled, and short term deals complicate that process.
Geology matters in terms of features to focus on as well. Yordy says safety has been a major theme for the past couple of years, so rigs without catheads are in. The deeper you have to drill, the more pieces of drill rod necessary and the more important this innovative quality becomes in shrinking jobsite liability.
Once the local geology has been determined, Moffitt says relevant attributes to look for are pretty straightforward. If drilling 500 to 1,000 feet down in rocky places, he suggests looking for a rig with an air compressor. In coastal areas, where soils are sandy and holes are shallow, a mud rig or hollow stem machine is ideal. As for combination areas or overburden and rock, combination machines are a smart option. Drilling rigs like these come with an air compressor and mud on board, or they have the capabilities off board to add them.
Generally, water well and geothermal drilling tend to intersect quite a bit, but differences do exist, and reliability is especially important in this market. &#;You need a high producing machine that&#;s not going to be breaking down and having down time because if you&#;re doing a big commercial geothermal job or you&#;re doing wells or boreholes for a school or hospital or something like that, you have kind of a timeline that you&#;re working on for the project,&#; Moffitt says.
For this reason, Yordy says brand new rigs are ideal and leasing is a great option for drillers who suddenly win a contract for a large scale project with an established timeline. Leasing contracts can be formed to offer all of the benefits that buying new does, including warranties, services and maintenance. If you don&#;t already have a set of brand new geothermal drilling rigs to drill a bunch of boreholes and you aren&#;t sure if or when the next large scale opportunity will come around, leasing offers peace of mind and means you don&#;t have to store and pay off the impractical equipment once the project&#;s over.
As for everyday residential jobs, Yordy says geothermal is a good market for buying used. After all, the borehole depth, around 500 to 600 feet, is pretty straightforward and consistent. &#;A rig that used to be 100 percent efficient, if it&#;s 65 percent efficient and it&#;s a cable drive and it still can drill 300 feet pretty easily or 400 feet pretty easily, they&#;ll use it,&#; he says.
In thinking about rig features, something geothermal makes a lot more of than water wells is mud. Yordy says a lot of drillers in this market go with a rig that weighs less than 50,000 pounds and has an all-wheel drive function so they can maneuver jobsites without getting stuck. Other qualities to avoid getting stuck in the mud include six-by-six trucks &#; larger than typical six-by-four water well trucks &#; and trucks with short wheel bases.
Similar to commercial geothermal drilling, the foundations market faces high pressure to be unwaveringly efficient. The choice between buying used, new or leasing is really specific to each end user&#;s needs, according to Ed Radford, director of commercial operations at Watson Drill Rigs. He says the risk in buying used is that determining how much life is left in the machine can be more challenging.
Risking reliability might not be the best route, as speed is everything to the drillers and clients in this market. &#;In the foundations industry, you&#;re in the critical path from the start of the project,&#; Radford says. &#;So if you are falling behind on production you affect the entire project and there&#;s potentially, in some cases, liquidated damages associated with that.&#;
With schedule and time being of the utmost importance, Radford recommends purchasing very productive machines, several machines or several very productive machines. The speed of the rig, the reliability of the rig, and the availability of parts and service for the rig are important features to consider.
Another aspect to keep in mind when tracking down rig qualities is space. Yordy, who&#;s worked with a company drilling foundation holes in the locker room of a college football stadium, says finding a drill that can fit into and function in the space in need of services is crucial. Carefully considering if it needs to be truck or track mounted to travel through a given site, and sizing the rods based on overhead clearance are key.
The geotechnical drilling market is just as focused on speed as foundations. Yordy says he&#;s never seen a leased geotechnical rig and he doesn&#;t suggest buying used. &#;They&#;re usually owned by construction companies that are always buying capital equipment anyway, and so they want to go with what&#;s easy to maintain and what&#;s going to work and when something&#;s depreciated out they get the next piece of equipment.&#;
Maneuverability matters for geotechnical drillers. If you&#;re planning a lot of work along the highway, checking for salt intrusion for example, truck mounted rigs are the most sensible. For work around, say, a gas station, Yordy recommends a remote track mounted system. As for drilling methods, auger and sonic are two of the most effective ways to go if sampling.
Within the mining sector contractors traditionally buy new or lease to own rigs if they are intended for large projects, according to Todd Courtney, business line manager for blasthole drills at Atlas Copco USA. For relatively small jobs, like a road cut, or if they don&#;t own the right equipment, he says it&#;s common and practical to rent the drill and return it after completion.
A new rig is particularly ideal for mining because jobsites are often rife with hazards and avoiding them is very important. Older rigs don&#;t promise to meet the latest safety inspection standards, so keeping equipment updated is ideal or you risk not being able to even get the drill onsite.
Keeping with safety, key qualities to look for in a drill include cages around the rods that spin in the top head and hands free rod loading functions.
The scope of work you plan to do largely determines what machine is right for you. Unlike water wells and geothermal, which can more or less be tapped into anywhere, Yordy points out that Mother Nature has placed precious metals in very interesting places. If you&#;re going to be drilling 6,000 feet, he suggests automated rod handling with every bell and whistle that&#;s possible. If you&#;re planning to drill into the mine from the side of a mountain then it has to be very portable since getting it there could require flying it in with a helicopter. In this case, he says to just look for the basics that would make the rod spin and provide good rotational torque for getting to the required depth.
For blasthole mining, Courtney suggests finding a drill that will allow you to drill projects with single path. &#;If you can avoid changing steel in production drilling, there&#;s a lot of benefit,&#; he says. Because there is such a wide variety of mines, he says it&#;s important to determine what size holes you plan to drill and what kind of material you&#;ll be drilling into when drill hunting. The harder the rock, the more air pressure necessary.
Gregory Guillot, global product manager for capital equipment at Boart Longyear, says the purchasing method for a drilling rig in the exploration market all depends on the contractor. Buying brand new is smart for a financially strong drilling company with visibility over the long run. For drillers with less of a sense of where they&#;ll be, say, a year down the road, Guillot suggests buying used to avoid the risk associated with the bigger investment of brand new. It&#;s most economical to rent, he says, if a specific job comes up at a specific location that&#;s well defined in time.
The company is the world’s best Crawler Mounted Water Well Drilling Rig supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.
Exploration drilling, according to Yordy, seems to have more stringent expectations regarding minimal invasiveness than production sites. &#;It seems like mineral exploration is not as favorably viewed upon as when we say &#;Hey, we&#;re going to drill for water and when we leave you&#;re going to have a new source of life,&#; or when we drill for geothermal we leave and we go, &#;We&#;ve made it so you don&#;t have to use as much fossil fuel and you&#;re going to save money.&#;&#;&#;
That said, surface exploration very much revolves around keeping everyone around the jobsite happy. That means the drilling rig needs to be as clean and pristine as possible. Drilling can, of course, be quite loud, so noise mitigation is important. A quieter rig, even if it needs to be customized, is a great idea.
Another quality to look for in an exploration rig is a sliding angle mast if you&#;re going to be drilling angle holes, Moffitt says. He says he knows of contractors that get away with using drilling rigs purposed for water wells for exploration, but without a sliding angle mast, they&#;re limited to vertical holes.
No matter the market, finding the right drilling rig and selecting the best purchase option are key steps in building a strong business. It all comes down to what&#;s most practical for the driller&#;s wallet, the kind of drilling being done and the geology of jobsites.
A lot of drillers, understandably, have an unrealistic image in their heads of a multipurpose drilling rig that can transcend all drilling markets, soils and depths, Yordy says. &#;What these guys need to think about is, do I invest $750,000 that&#;s going to do most of my work, or do I try to buy a $1 million plus piece of equipment in hopes of a couple extra jobs?&#;
Knowing the scope of one&#;s work and finding a rig that meets it is the safest, smartest way to go. Yordy advises drillers to go by a simple rule to stay practical and prosperous.
&#;What they need to do is they need to think about 75 or 80 percent of what their primary business is and look for a rig that&#;s going to do that.&#;
Valerie King is associate editor of National Driller.
Drilling rig
·
Follow
4 min read
·
Oct 9,
--
Water well drilling rig is an effective way to obtain a reliable source of clean water. Water wells provide a sustainable and independent source of water that can be used for a variety of purposes, such as household needs, irrigation and drinking. Drilling a water well with a water well drilling rig is risky because it is a one-time investment. This is why equipment is one of the key factors that will determine the success or failure of drilling a new well. Here are some things you should consider when looking for the right water well drilling rig.
Evaluate your drilling requirements
However, it is important to assess the drilling requirements before getting a firsthand look at the various available drilling rigs. Consider how deep the well you plan to dig is, the type of ground you expect to be dealing with, and where the water table is. Analyzing these factors will allow you to get a proper understanding of which drilling rig is right for your project.
Types of water well drilling rigs
Another factor that affects water well drilling is the type of drilling rig used, which vary in design and operation. Truck drilling water well drilling rig is particularly suited to deep wells, but is able to handle varying ground conditions. Impact drilling rigs, however, are better suited for drilling at shallower depths and in soft soils. This is because when choosing between the two, the pros and cons of each type will influence your selection process.
Power and performance
Another factor that should not be overlooked when it comes to drilling machinery is its power and performance. Keep in mind to choose the right power drilling rig for the depth of the well and the type of ground you will be drilling. The drilling efficiency is also affected by the torque and speed of the rig, which are crucial for an efficient drilling process. What&#;s more, a powerful rig also increases drilling speed, reduces or eliminates wasted time, and reduces maintenance costs.
Mobility and Portability
The transportability of a water well drilling rig is also a key factor. In some cases, especially in remote areas, it may be helpful to use a portable rig. Trailer water well drilling rigs or truck mounted borehole drilling rigs may also provide greater mobility and ease of transportation. On the other hand, if a large, centrally-located construction site is to be designed, a static rig may be more appropriate for use.
Durability and Maintenance
Purchasing a durable water well drilling rig is not only highly wear-resistant, but also serves as a reliable tool for subsequent use. Specifically, look for drilling rigs made from quality materials that are suitable to withstand harsh working conditions. In addition, the main aspects to consider are ease of maintenance and availability of spare parts. Apart from the risk of frequent breakdowns, a well-maintained rig will maximize its lifespan.
Cost and budget analysis
Last but not least, cost considerations are inevitably an important aspect of the investment decision. The cost of water well drilling rigs can vary greatly depending on size, type, and other specific features. Consideration of capital expenditures and subsequent transportation costs is critical in the early stages of advancing an idea. Cheaper rigs may cost less initially, but may prove costly in the long run due to high maintenance costs and lower returns. On the other hand, a rig that costs more than others may be a high-quality rig that will provide a better return because it can work longer without major repairs.
Conclusion
It is worth noting that there are various factors that must be carefully considered when choosing the right water well drilling rig. By weighing your drilling needs, understanding the basic classifications of drilling rigs, evaluating power and performance, and considering the maneuverability of the rig, the total cost of the rig, and the quality of the equipment, you will be better able to make the right decision. Don&#;t worry, our professional consultants will provide you with suitable and quality solutions, and we are available 24 hours a day online, so please follow us. Read more from https://www.dminingwell.cn/news/how-to-choose-the-water-well-drilling-rig-.html.
If you are looking for more details, kindly visit Water Well Drill Pipe.