If you want to learn more, please visit our website uprintingplus.
Book size, also known as trim size, may seem like a trivial detail in your book publishing strategy. But depending on your readers, your genre, and your book type, you probably should take a look at the different options and determine which book size will be best for you.
In this article, you will learn:
So I've been writing and formatting books for a long time. 10+ years as of this writing.
But I actually found formatting to be a huge pain, which is why I actually created my own formatting software that solved all my problems. I called it Atticus.
But this isn't meant to be a sales pitch. I just want to make sure it's clear that I know what I'm talking about. The amount of research that went into not only formatting my own books, but also creating a formatting software is huge.
I researched everything, from tiny margin requirements, to the specific type of quotes to use (curly or straight, it makes a difference).
And yes, of course, that includes book trim sizes.
So if all that makes sense, hopefully you'll come along with me as show you everything I've learned.
Put simply, trim size is the height and width of your print book. Some books will be larger than others, some smaller.
For those who publish through KDP or IngramSpark, they will present you with a list of possibilities, each with pros and cons, depending on what you want.
Note: In the US, inches are primarily used to denote book size, whereas the metric system is more commonly used in the U.K. and other countries. I will make sure to use both where I can, but will default to inches.
Other important terms to remember when dealing with trim size include the following:
If you're using a program to adjust your trim sizes, I recommend Atticus, which will automatically format everything for you, so your trim size, margins, bleed, and all those other pesky details will be taken care of for you.
For a nice summary of this article, along with a few of my own personal thoughts on the subject, be sure to check out this video on different trim sizes you can use.
Want more videos like this? Be sure to subscribe to my YouTube channel for weekly videos!
Think back to the last time you were in a bookstore. What books caught your eye? Were they the large hardcovers with dramatic covers, or were they the mass market paperbacks perfectly lining shelves?
Readers tend to have different tastes. Some love the solid feel of the thick hardcover. Others (myself included) love the uniform feel of smaller-sized paperbacks on the shelf.
But there are far from just these two options. Children&#;s books, for example, usually require radically different standard book sizes.
What you choose will have an effect on the reader's experience (assuming they are reading a print book). Depending on what you want for your reader, and the genre you write in, you will need to carefully consider what standard book size you choose.
Generally speaking, there are three classes of trim size that you should consider for your book. Each of these has several common sizes in each, so there is some flexibility. These are:
You may also hear terms like these thrown around, especially among libraries and publishers, to denote the common size of a book:
While these terms are handy to know, they are not as important when determining the size of your book, especially when using digital print-on-demand services like KDP Print or IngramSpark.
The hardcover book is the industry standard, especially in traditional publishing, for new books released in book stores. They are the largest, the most durable, and take up the most real estate in a bookstore.
They are also the most expensive, and most traditionally published authors will make a lot more money from the sale of a hardcover than a paperback.
Until recently, IngramSpark was the best option for authors who wanted to make hardcovers of their book. But Amazon has launched a hardcover service, which is currently in beta at the time of this writing.
For indie authors, a paperback book (also known as a trade paperback) will make up the majority of the print books you sell.
Paperbacks likewise have more standard size options than hardcover (on both KDP and IngramSpark), and they are cheaper to produce, which means they are less expensive for the reader.
Less common for self-published authors, mass-market paperbacks (also known as the pocket book) were originally designed to be the cheapest option for readers, using significantly less paper, and usually lower-quality paper as well.
Mass-market paperbacks are not as common ever since the ebook emerged and took their place in the affordability and convenience markets. However, they still exist, and IngramSpark even has some paperback printing options in their size. KDP does not.
While there are other print-on-demand services, many if not most self-published authors use either KDP Print or IngramSpark. While this is not a review of either, the reasons for one or the other usually come down to the following:
Let&#;s take a look at what each service has to offer in print sizes.
Note: While KDP Print does now have hardcovers in beta, it does not offer hardcovers with a dust jacket. IngramSpark does.
While IngramSpark clearly has a lot more options, bear in mind that the vast majority of authors will not need most of these different sizes. Most fiction or non-fiction authors can probably get by with 5 x 8&#;, 5.5 x 8.5&#;, or 6 x 9&#;.
If you have books of a special variety, such as a graphic novel or children&#;s book, that you might want to give IngramSpark a serious look. There&#;s a good chance it will have what you need.
When you are formatting your print ready PDF, a knowledge of your page size will be critical to your formatting process.
If the table above was too overwhelming, don&#;t worry. Most of these sizes are not necessary for the vast majority of fiction and non-fiction authors.
To make it a little easier for you, here are some of the most common sizes in traditional and indie publishing.
There is some variation depending on the genre, and some book types (like a photo book or art book) can have a wide variety of sizes, but these are the standard sizes for most of the industry.
For more information, please visit Customize Contents and Sizes for Hardcover Book Printing Mockup Set.
On the off chance that you need a size that is not covered by KDP or IngramSpark, you can find offset book printing companies to do the work for you.
For example, let&#;s say that you want a coffee table book, or perhaps a children&#;s book that is only four inches tall, but eleven inches wide. An offset printing company could do this for you, as they can handle most unusual print sizes.
Another example would be a book with special needs, such as foldable inserts.
However, offset printing companies are significantly more expensive and time-intensive than a regular digital printing company. So expect to pay upfront and extra for the service.
In other words, only use an offset printing company if you absolutely have to. I recommend trying to make it work with KDP or IngramSpark first.
There are four factors to consider when choosing a trim size:
Let&#;s cover each of these in more detail.
While there are no hard and fast rules about what trim size you should have for each genre, there are a number of trends and suggested sizes for each.
For example, a huge epic fantasy might benefit from a larger print size, because having a huge doorstopper of a book is expected for that genre.
On the other hand, you might want a smaller print size for a horror or thriller, so there are fewer words on each page, making the reader feel like they are flying through the book.
Here are the more common sizes for various book types:
Art and photography books are another consideration, but there are no set standards for these. Choose whatever you feel is best. I would personally recommend one of the square sizes for a photography book, but almost anything will do if it fits the aesthetic you are looking for.
In most cases, especially if you are using KDP Print or IngramSpark, the larger your trim size, the more expensive your book will be to produce.
This is true, even if the larger print size results in a lower page count by fitting more words on each page.
What this means is that your book will be more expensive to the reader, which could drive down sales.
Despite this, you don&#;t necessarily want to pick the cheapest option possible. Sometimes having a large book is necessary, depending on the needs of the market and the readers&#; expectations.
Additionally, if you&#;re trying to increase ebook sales, having a really expensive paperback could make it seem like the ebook is a much better deal. So while cost is something to consider, it&#;s not the end of the world if your book is more expensive to produce in print form.
Consider your audience. What do they like? Where are they reading?
Are they reading on the go? If so, you might want a smaller print size to be easier to transport.
Are they reading at home in their cozy arm-chair, or perhaps they have poor eyesight? In this case, a larger book with a larger font size might be in order.
Ultimately, I can&#;t list every instance when you would want a larger or smaller trim size. So my best recommendation is to study the genre.
Go to a bookstore, take a tape measure or ruler with you and look at the books that are sitting on the shelves. You&#;ll probably find a lot of variation, but also some general trends in your genre.
Pay close attention.
As you can see, there is still a wide degree of options for each category, and there are no set rules.
That is why, ultimately, it comes down to what you want.
While I do recommend staying within the general guidelines outlined above (don&#;t go publish a novella at a 8.5 x 11&#; trim size, for example), it&#;s ultimately up to you.
Personally, I prefer 5 x 8&#; for my fiction, because I like smaller books, and I try to keep it as consistent as possible because I like how uniform everything looks on my shelf.
But that&#;s just me. You may have a completely different opinion and that is fine.
I&#;ve given you my suggestions, along with a wide variety of options, and a comprehensive look at what KDP Print and IngramSpark have to offer.
Now it&#;s your turn. What will you choose? Leave your comments down below. I&#;d love to hear your choices, and your reasoning behind them.
Pin
5
5
Shares
A spine refers to the edge where the outer covers and interior pages are bound, typically featuring artwork, the publication title and the author's name. Upload a single PDF file or design one as part of a cover spread at 300 dpi. You can find your spine dimensions in your Shopping Cart or Artwork tab. Add 0.125" bleed to the top and bottom of your spine. For Hardcover items, add a 0.2" hinge area on both sides of the spine and 0.8" bleed to the top and bottom. Labeling your files will also ensure they appear in the right place. If you cannot upload spine artwork, add a blank page by clicking the blue three-dot button under the spine thumbnail. Print work will only appear if you upload a spine design file. Otherwise, it will remain blank. Visit our File Setup Support Page for more information.
Want more information on Wholesale Hardcover Book Printing? Feel free to contact us.