Gypsum Calcination Production Line to Produce ...

28 Oct.,2024

 

Gypsum Calcination Production Line to Produce ...

The crushing system can crush large ore from mine mining to an average granularity of 25 mm by one time, is an ideal version of traditional ways of two and three stage crushing.

If you are looking for more details, kindly visit wuxing.

Milling System 


 

The mill system will make the gypsum particles into gypsum powder,through the combined action of analysis machine and fan, this mill can meet the fineness of grinding requirements from different users.

Calcinating System


 

4. The installation period is short and the area is small

4. The installation period is short and the area is small

4. The installation period is short and the area is small

4. The installation period is short and the area is small

Calcination system is the key link in the production and processing of gypsum powder, and it is also the most difficult part to master. According to this situation, we have developed a new generation of gypsum powder suitable for various application - a new type of hot air boiling furnace

Calcination system is the key link in the production and processing of gypsum powder, and it is also the most difficult part to master. According to this situation, we have developed a new generation of gypsum powder suitable for various application - a new type of hot air boiling furnace

Calcination system is the key link in the production and processing of gypsum powder, and it is also the most difficult part to master. According to this situation, we have developed a new generation of gypsum powder suitable for various application - a new type of hot air boiling furnace

Higher quality standard

 

Hot air boiling furnace & Thermal oil Boiling furnace Technology Comparison

 

1 When you switch on and off the production line oftenly:

Thermal oil Technology: When you use this technology, the production line switch off, and he oil is still very hot, about 200 degrees The heat from the oil will take too much time to cool.

 

1) After machine off, the raw material stopped to add: during this cooling time, the heat of oil will be transferred to the exising gypsum powder inside of the furnace. So with too much heat, the powder will be burnt out.

2) When start again , when add some new raw gypsum, then the Calcined gypsum and raw gypsum will all be mixed together.

Then the finished gypsum powder is so uneven.

 

The oil total about 2-3 tons for one production line, with temperature of 200 degree. So when the production line switch off, all these heat will release to the gypsum powder in the boiling furnace. also the release time is very long.

This is why this technology, it is not suitable for some customers that often switch it on and off all the time. 

 

Hot air technology: As when it switches off, It is warming rapidly, cooling faster.  So this technology is easier for customers to switch on and off the production line often. 

Want more information on Gypsum powder production line equipment? Feel free to contact us.


 

 

2 The danger of Thermal oil technology:

Sometimes if workers do not notice that the circulation pump of oil does not work, so the hot oil in the tube is heating all the time and not keep cycle status. In this situation, it will happen big explosion.

At beginning the tube of oil will not have leakage oil problem, but after several years of operation, the tube will be aging so it will leak oil and then the dangerous fire will happen in near future.

 

Regards hot air technology no need oil and such kind of problem will not happen, the whole equipment for hot air technology is easy and with less maintenance.

 

3 The gypsum powder industry development:

Before the year, thermal oil technology was mostly used in China. After year in China, more and more customer choose the hot air technology as their frist choice. 

Both technology are very mature for gypsum powder production now . 

 

4 For the thermal oil technology: 


 It needs the thermal oil boiler and thermal oil. The boiler is one set of signal boiler, so after you receive it, it can be used directly, no need special treatment in your warehouse.  

 

For the hot air technology, the combustion chamber,

it needs to be built with Fire-resistant bricks on your site by our engineer.

Like you said the OMV has rebuilt the combustion already. It is mainly because the bricks have drop down which caused by the light oil sticks on the bricks. Such kind situation very less happens to other projects.

For this part, also we have made some update. such as the brick size was 11cm. Now we are using 23 cm bricks which is bigger twice than before.

 

engineer installation

 

50-T/D Gypsum Powder Production Plant Price Low ...

Every payment you make on Alibaba.com is secured with strict SSL encryption and PCI DSS data protection protocols

Easy Return & Refund

Claim a refund if your order is missing or arrives with product issues, plus free local returns for defects on qualifying purchases

The company is the world’s best Gypsum powder plant machinery supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.