Positive drive and tracking
Plastic modular belts do not need any pre-tensioning and are not affected by mistracking issues often caused by a poor conveyor design or heavy contamination. The positive drive given from sprockets avoids any possible belt slippage and guarantees smooth operations resulting in much less maintenance and downtime.
Resistance to extreme conditions
Plastic modular belts do not need any pre-tensioning and are not affected by mistracking issues often caused by a poor conveyor design or heavy contamination. The positive drive given from sprockets avoids any possible belt slippage and guarantees smooth operations resulting in much less maintenance and downtime.
You will get efficient and thoughtful service from SINODA.
Plastic modular belts work safely and reliably in a wide range of conditions and temperature ranging from -70°C to +240°C. HabasitLINK product range has a solution for wide temperature variations, humidity, aggressive chemical agents, cutting operations, product impact, high speed and abrasive environments.
Quick repair and maintenance
It is unusual for a plastic modular belt to require maintenance or repair, but, should it become necessary, the belt is easily opened using simple tools such as a screwdriver. It can be repaired and re-closed in a short period of time without the need to replace the full belt. Downtime is reduced to a minimum and, as plastic modular belts do not need lubrication, no additional maintenance is required.
M Roller Top 1"
- For radius and straight conveying
- Collapse factor 2.2 (unchanged)
- 35 % open area; largest opening 6x12.5 mm (0.24"x0.49")
- Roller lateral spacing 50 mm (2&#;)
- Minimum free edge 42 mm (1.6&#;)
- Rollers row spacing 50.8 mm (2&#;)
- For low back pressure, wearstrips are placed between rollers
- For product driven application wearstrips are placed directly under the rollers
- Excellent for cooling and draining
- Food approved materials available
- Rod diameter 5 mm (0.2")
M Radius Flush Grid 1"
- For radius and straight conveying (collapse factor 2.2)
- 35% open area; 53% open contact area; largest opening 6x12.5 mm (0.24"x0.49")
- Excellent for cooling and draining
- Easy to clean
- Food approved materials available
- Rod diameter 5 mm (0.2")
Available accessories
- Flights
- Side guards
- Hold down devices
- GripTop modules
- Lane divider
M Radius GripTop 1"
Want more information on Radius Flush Grid Modular Belt? Feel free to contact us.
- For radius and straight conveying, with inclines (collapse factor 2.2)
- 20% open area; largest opening 5x7.5 mm (0.2"x0.3")
- Indent 21 mm (0.83")
- Abrasion resistant GripTop, high friction
- Food approved materials available
- Rod diameter 5 mm (0.2")
- "Open window" sprockets
Accessories
- Clip-on side guards
M Radius Flush Grid 1" MTW
- Mold to width radius belt 12" (306 mm) wide, for radius and straight conveying
- Collapse factor 2.1
- Hold down device on both edges
- 35% open area; 53% open contact area; largest opening 6x12.5 mm (0.24"x0.49")
- Excellent for cooling and draining
- Easy to clean
- Food approved materials available
- Rod diameter 5 mm (0.2")
- Open window sprockets
Available accessories
- Flights
- Side guards
- Lane divider
M Tight Radius 1" MTW
- Mold to width radius belt
- For radius and straight conveying, ideal for applications with limited space
- Collapse factor:
- MK04: 1.25
- MK06: 1.32
- Open area: 38 % (MK04), 32 % (MK06)
- Open contact area: 64 %
- largest opening (belt edge):
4" width: 7.6 mm x 14.5 mm (0.30" x 0.57")
6" width: 10.0 mm x 12.8 mm (0.38" x 0.50")
- largest opening (middle of belt) for 4" and 6":
7.6 mm x 10.6 mm (0.30" x 0.39")
- Excellent for cooling and draining
- Easy to clean
- Food approved materials available
- Rod diameter 5 mm (0.2&#;)
M Tight Radius GripTop 1"
- For radius and straight conveying, ideal for applications with limited space (collapse factor 1.6)
- 38% open area; 75% open contact area; largest opening 6.5x12 mm (0.26"x0.47")
- Excellent for cooling and draining
- Abrasion resistant GripTop, high friction
- Food approved materials available
- Rod diameter 5 mm (0.2")
Contact Stiles for accessories
- Adjustable radius plugs available: sizes 1.9, 2.2 and 3.0 turning radius
- Side tabs
- Side guards
M Tight Radius 1"
- For radius and straight conveying, ideal for applications with limited space (collapse factor 1.6)
- 38% open area; 75% open contact area; largest opening 6.5x12 mm (0.26"x0.47")
- Excellent for cooling and draining
- Easy to clean
- Food approved materials available
- Rod diameter 5 mm (0.2")
Contact Stiles for accessories
- Adjustable radius plugs available: sizes 1.9, 2.2 and 3.0 turning radius
- GripTop modules
- Lane divider
- Side tabs
- Side guards
MATERIAL SPECIFICATIONS For
For more information, please visit Grip Top Modular Belt.
- Chain
- Pins
- Sprockets
- Accessories