Laser safety Glasses:
If you want to learn more, please visit our website NB.
180 - 540nm OD 6+, 315 - 540nm DIRM LB6
800 - nm OD 5+ ,800 - nm DIR LB5
900 - nm OD6+ ,900 - nm DIRM LB6 LP S CE
Typical laser wavelength&#;355nm,405nm,532nm, 980nm,nm Laser Safety Glasses for the laser technician.
CE Certified&#;Standard EN 207:.; Block UV.
Application: KTP lasers safety ; ND:YAG Laser protection 2 line YAG,Q-Switch,Green laser Safety,Blue Laser safety.
Laser Safety eyewear has a Visible Light Transmission (VLT) of 30% and an Optical Density of 5+. The VLT value is the percentage of visible light that can travel through the glasses, the higher the value is, the better visual you get.
Q&A
Q: How many types of protective glasses are there? What is the difference?
A: Two types in total, absorption and reflection type. Absorptive goggle: The laser absorber was added to lens material. Reflective goggle: The surface of the lens was covered with a reflective film.
Q: How often to replace the protective goggle?
A: Absorptive goggle: Normally replace in 1-3 years, depending on actual use. Reflective goggle: Normally replace in 1-2 years. If the reflective film is scratched, it can no longer be used and needs to be replaced.
Contact us to discuss your requirements of Laser Protection Film. Our experienced sales team can help you identify the options that best suit your needs.
Q:Does invisible laser hurt your eyes?
A:Yes. Usually invisible laser including 808nm, 980nm diode laser, and nm ND: YAG laser, they are even more dangerous than visible laser, and should be more careful while working with it.
Q:Does low power green laser pointer hurt your eyes?
A:Yes. We mean low power green laser pointer usually is 5mw to 20mw. This is enough to hurt eyes if do not use it in right way. It is prohibited to see the laser beam on the wall, and 100% prohibited to shoot eyes by this kind laser pointers.
Q: Can sunglasses be used instead of laser safety glasses?
A: No, the filters of laser safety glasses have a special absorber composition that reduces the laser energy for a short period of time. Due to the high concentration of laser energy in a very short period of time, ordinary sunglasses cannot block any laser at all.
Q: What is the visible light transmittance?
A: Used to indicate the percentage of visible light that passes through the laser goggles. The higher VLT%, the brighter the lens and the clearer the field of vision.
Q: What is the optical density?
A: Used to indicate the percentage of laser light of a specific wavelength that can pass through the laser goggles.
For Example:OD1+: This means that 10% of the laser light of a certain wavelength can pass through the laser goggles.
The same principle is as follows. OD2+: 1% ; OD3+: 0.1%; OD4+: 0.01%; OD5+: 0.001%; OD6+: 0.%; OD7+: 0.%
Special Remarks: Do not use alcohol or alcohol containing disinfectant to wipe the frame.
Are you interested in learning more about Heat Blocking Window Film? Contact us today to secure an expert consultation!