PERMANENT MAGNET SCREW COMPRESSOR

20 May.,2024

 

PERMANENT MAGNET SCREW COMPRESSOR

The vertical design ensures that the lubricating oil on the end face of the per

If you want to learn more, please visit our website.

manent magnet motor and the spiral rotor is fully infiltrated and further improves the cooling effect of the lubricating oil.

Permanent Magnetic VSD Screw air compressor PM series

  • 1 Down-to-earth investment for the future

    What's important is not initial cost but life cycle cost . INVERTER compressrs may look more expensive than fixed speed model, but many customers choose them because they know importance of life cycle cost & return on investment when it comes to choosing compressors.

  • 2 What you pay should be only for what you use

    SCR compressor can adjust compressor's rotating speed depends on the demand of factory load which changes from moment to moment by own developed algorithm. Thus, it can provide exact volume and pressure what customer needs and achieve maximum energy saving.

    Achieve an energy-saving effect under any load operation through wide-range inverter control, wide-range control, and e-STOP function.

    kapa Product Page

  • 3 Special Dual Housing Oil Cooling Motor

    Permanent Magnet motor adopt dual housing design with IP65 protection grade, there have space left for oil channel between the inner housing and outer housing. It take use of compressor itself lubricant system to cool down motor circularly through its oil channel, no touch with outside cooling air, and more suitable for the dusty environment,  It break through the traditional air cooling motor disadvantage with IP23 or IP54 protection grade.

  • 4 Special morse connection

    PM motor rotor is directly mounted on the airend shaft, No gears or belts, no coupling, Zero transmission loss, Easy for installation, No need to make adjustment, Better protection for inner parts of PM motor. There’s no bearing for the PM motor, so motor is 100% free maintenance, Reduce maintenance cost.

  • 5 Double Frequency conversion system

    Constant pressure output:
    A significant energy-saving effect can be achieved by constant pressure control Pressure fluctuation can be controlled within士0.01MPa.

    Constant temperature output:
    Normally the temperature is set at 81℃,ensure the best lubrication performances while avoid the sudden stop caused by haigh temperature.

    Want more information on Permanent Magnet Screw Compressor,? Feel free to contact us.