Stainless Steel Plates：Used for placing various oral instruments.
● Preferred material, precision machining
● High quality stainless steel, can be sterilized at high temperature and pressure
● Reusable, easy to operate
For more information, please visit stainless steel medical square plate material.
Stainless Steel Bend Plate
Big:215*145*25mm
Middle:200*128*25mm
Small:183*120*25mm
Stainless Steel Square Plate
Ordinary stainless steel/304 stainless steel
Size:215*105*20mm
Square Plate with cover and without hole
8” Size：200×110
9” Size：250×160
12” Size：300×200
Square Plate with cover and hole
8” Size：200×110
9” Size：250×160
12” Size：300×200
1.Materials：
Uncoated material selection requirements are very high, expensive medical stainless steel materials can be the basis for the production of uncoated products, to ensure its excellent corrosion resistance while having high hardness and environmental standards.
2.Process:
No coating is very demanding on the surface treatment of the product, there is no coating concealer, completely clear, so no defects, fine cracks, surface roughness and so on will be very obvious. No coating series - are generally polished by more than 10 years of experience of the master.
3.Durability:
The rust resistance of the material itself and the excellent surface treatment process make it have an unparalleled service life. The use of electroplating equipment for a long time, the surface coating off or uneven coating during processing will cause rust, and once rust is out of control. No coating corrosion resistance does not depend on the surface coating, the corrosion resistance of the substrate itself is the basis of rust prevention, so it can be as new as time.
4.Non-toxic whitening:
No coating series for environmental protection equipment, the material is made of medical stainless steel. Hexavalent chromium and cyanide in electroplating equipment are highly toxic substances and are easily absorbed by the human body.
Are you interested in learning more about sintered metal filter disc price? Contact us today to secure an expert consultation!
① Regular disinfection operation mode, first of all: disinfectant immersion, generally the use of multi-enzyme cleaning solution, depending on the degree of contamination of the instrument, heavy pollution (refers to the residual blood stains on the surface after use, and then no immediate immersion disinfection, blood stains and stains dry solid) in the case of disinfectant ratio 1: 100, soak for 15 to 30 minutes, light contamination (refers to the use of the surface of the blood is not dry solid, and then immediately disinfected) in the case of disinfectant ratio 1: 300, soak for 3-5 minutes, after soaking, clean with water, and then drain or dry, so that there is no moisture residue on the surface of the instrument, and then vacuum into the sterilization bag, put into the disinfection cabinet disinfection, generally using 134° three times chlorine vacuum disinfection.
②The procedure of instrument cleaning and disinfection is disinfection, cleaning, drying and sterilization. Because chemical disinfection has a certain corrosive effect on metals, physical disinfection methods are usually used: such as boiling, high pressure steam, dry heat, ultraviolet light, microwave, etc. Autoclave or dry heat method is the best. Among them, boiling, steam and other disinfection with water must go through the drying and drying process. It can not only ensure that the equipment gills and other parts are eroded by water for a long time, but also avoid 2 times of pollution.
Choosing a Carbon Steel Plate can be a complicated task. There are many different types of plates available on the market, and it cannot be very clear to know which one is right for you. Here are some tips to help you make the right choice.
Generally, the carbon content of low-carbon steel is less than 0.25%. It can also be referred to as mild steel. These steels are used in a wide variety of applications. They are ideal for structural applications because of their moderate strength. They are also suited for wear-resistance products, pipes, and rivets. They are resistant to rot and brittleness.
It is essential to choose a SA 516 GR.70 Plates that suits your application. There are many factors that you need to consider. These include the steel’s strength, the material’s flexibility, and the product’s cost. The strength of the steel is increased by heat-treating the material. The flexibility is determined by the amount of stretching the material can achieve before breaking.
The machinability of the metal is a good indication of its overall hardness. The elongation of the material is also an excellent metric to measure its stretchability. A high extension will increase the length of the material before it breaks. Other elements added to the carbon in the steel improve its corrosion resistance, wear resistance, and tensile strength. The amount of these elements can vary, but they usually add up to one wt. Percent.
In addition to the carbon in the steel, there is also a small amount of manganese. In rolled steel structural plates, this amount is usually around 1.5%. The manganese in these materials also contributes to its strength. The most affordable and often used kind of carbon steel is Carbon Steel Plate, commonly referred to as mild carbon steel plate. It is significantly weaker and softer but more fabricated and simple to process, such as forging, welding, cutting, etc., with a carbon content of less than 0.25%.
Choosing the correct boiler steel plate is crucial. It helps to reduce the risk of cracking. Moreover, the material will last longer. Getting the wrong grade plate can also waste money. However, by knowing the different qualities of scale, you can choose the right type of steel.
A boiler-quality plate is made of high-quality carbon steel. This material has a tensile strength of about 30,000 pounds per square inch. It is also highly resistant to corrosion. It is used in various industries, such as petrochemical, gas, offshore facilities, and onshore facilities. It can be normalized to fine austenitic grain size, allowing for increased strength.
In order to manufacture the boiler quality plate, the production process requires precise temperature control. It is also necessary to control the chemical element content. The chemical elements affect the weld performance of the material. In addition, the production process requires pure steel smelting technology.
The main application of boiler quality plates is the welded pressure vessels. This type of vessel is generally constructed by welding multiple curved steel plates together. It is important that the welds have good strength and flexibility. The material must also be weldable without compromising the structural integrity of the pressure-retaining vessel.
The best welding method for pressure-retaining vessels is fusion welding. This allows clean solid joints. Moreover, the material must be free of micropores.
Stainless steel is a highly durable and corrosion-resistant material. It is commonly used for applications such as cookware, medical devices, kitchen accessories, and architectural features. It is also known for its attractive appearance. While carbon steel has a lower cost and is more easily made into a sharp, razor-sharp item, it lacks the corrosion resistance of stainless steel. It may also not have the tensile strength of stainless steel.
Stainless steel has a layer of chromium oxide on it to protect it from rust. A layer of chromium will not rust when it is exposed to moisture. There are many different grades of stainless steel, depending on the amount of chromium and carbon content. Generally, the higher the percentage of chromium, the more durable the stainless steel will be. However, there are other alloying elements added to steels to increase their properties.
For more sintered metal porous filterinformation, please contact us. We will provide professional answers.