Filson stainless steel filter cartridge also names ss filter cartridge, stainless steel filter element. Depending on different process technology, it mainly consists of stainless steel mesh filter cartridge, stainless steel filter baskets, stainless steel pleated filter elements, stainless steel sintered filter elements, and wedge wire filters.
For more information, please visit metal porous sintered filter.
Filson high-quality stainless steel filter cartridges provide micron rating from 1 to 5000 microns, they are ideally applied for high temperature, high pressures, heavily contaminated fluids, and corrosive environments.
To meet your special application and existing filter housings, Filson stainless steel water filter cartridge, stainless steel air filter and stainless steel filter cartridge for liquids are available with various shapes and sizes design with different lengths or end caps for your convenient installation.
In Filson own stainless steel filter cartridge production factory, no matter with epoxy-bonding, welding, sintering, and crimped construction, we could batch production in urgent delivery time. And we have a most extensive warehouse with more than 500 kinds of standards stainless steel filter elements for quick delivery.
Compare to micro fiberglass or paper filter elements, Filson stainless steel filter cartridges will cost you much money in the beginning, but after a period time of using, they will help you save more costs since all our ss filter cartridges are easily cleaned and reusable by backflushing and ultrasonic techniques.
To make sure our stainless steel filter cartridges remove particles effectively, we will make bubble point test, burst pressure test, hydrostatic burst test and etc. before delivery. Testing photos and videos of ss filter cartridge can be taken for your check.
Just tell us your application, flow rate, working pressure, filtration accuracy, our professional technical team will offer you a customized stainless steel filtration solution in 24 hours, even with MOQ-1PC.
• Filter material: mainly made of stainless steel 304 or 316
• Filtration accuracy: 1μm ~ 5000μm
• Working pressure: 10bar-420bar.
• Working temperature: -30°C~+260°C
• Structure: cylindrical and pleated
• End design: DOE, 222/flat, 226/flat, others on request
• High strength resistance to withstand high differential pressure
• More pleats for stainless steel filter larger surface and filtration area
• Cleanable and reusable for long service life
• Excellent heat & corrosion resistance
• Variety of seal configurations for various application
• Customized ss filter cartridge options available for fluids and gas
• Power generation
• Water treatment
• Chemical processing
• High Differential Pressure
• Corrosive oil and gas
• High Temperature
• Electronics
• Factory equipment
• Blowback for gas applications
• Backflush for liquid applications
• Ultrasonic cleaning is used to remove chemically inert materials.
• Chemically remove contaminants by using solvents, caustic wash, acid wash, water, and air flush.
We don’t have MOQ limited, usually with 1 PC.
For custom stainless steel filter elements, we will produce and delivery within 7-15 days.
Package: Carton or wooden case as your request.
Shipping:
1. FedEx/DHL/UPS/TNT for samples or small order, directly to your company.
2. By Sea from Qingdao or Shanghai port
3. By air from Zhengzhou airport, 3-5 days arrival
Contact us at sales@filsonfilter.com, and please tell us your present filter housing structure, or elements dimensions, micron rating and applications. Our support team will contact you as soon as possible.
T/T 30-50% as deposit, and balance before delivery
Yes, we offer OEM service and customize brand logo or model numbers on the products, including stainless steel mesh filter cartridge, stainless steel pleated filter elements, stainless steel filter baskets and sintered stainless steel filter elements, etc.
Stainless steel filter cartridge
Pressurized gases– for protecting the equipment from oil, water, dirt and other impurities in compressed air.
Water treatment– used for passing water on a large scale since stainless steel prevents elements such as rust, algae, chemicals, decaying sediments, and organic matter, among others.
Fluidized bed combustion – it is essential in eliminating impurities from the system given that the process involves chemical reactions and rapid heat transfer.
Gearbox and bearing oil lube filtration – helps in cleaning the oil or lubricants that might have contaminations as a result of abrasion from moving parts hence enhancing the efficiency of the system function.
Condensate water – helps in preventing iron from corrosion and removing it to enhance the movement and safety of the whole system.
Seal protection – it helps in eliminating the impurities, which may get to the rotating parts of the system.
Fluidized bed combustion–it helps in enhancing the efficiency of the system by eliminating impurities even if it works at high temperatures.
There are two major types of construction for this type of filter cartridge which include the following;
Stainless steel is the main type of material used for manufacturing Filson SS filter cartridge which comes in five classifications including;
Cylindrical vs pleated ss filter cartridge
The major difference between these two designs is on the model of application for different industries as well as composition.
The pleated design uses pleated media in support of central core whereas the plain design uses a sleeve of a filter media in support of a central core.
The plain design is constructed using a sintered wire mesh that has five layers sintered in a vacuum.
On the other hand, the pleated design provides double the efficiency of a cylindrical stainless steel filter cartridge.
Stainless steel is generally one of the best non-corrosive materials that are available.
Therefore, this resistance to corrosion makes it ideal for all sorts of chemicals to move through without any challenge whatsoever.
Different end confirgurations for stainless steel filter cartride
Some of the advantages of stainless steel filter cartridge include the following;
On the contrary, stainless steel filter cartridge also has a few disadvantages such as;
The types of this product are dependent majorly on the particular application, and they include the following;
The maximum pressure for a specific stainless steel filter cartridge depends on a wide range of elements including:
In most instances, however, the manufacturer always tends to specify the maximum pressure that a specific device can handle.
Just like the working pressure, the extreme temperature that a stainless steel filter cartridge can handle is also dependent on the application as well as the particular material used form making it.
And the manufacturers will always specify the maximum temperature that the particular device can handle.
Micron rating refers to the representation of the overall size of openings which are between the pieces of filter material.
Mesh size, on the other hand, refers to the measurement of a particle often used to determine the particle-size distribution of a granular stainless steel filter cartridge material.
In general, the larger the micron rating of a stainless steel filter cartridge, the wider the holes.
Working of cartridge filter
Ordinarily, a high-quality stainless steel filter cartridge permits flow rates of up to 500 gallons per minute.
Cartridge filter housing
Some of the most important elements you need to factor in when choosing ideal stainless steel filter cartridge include the following;
The best time to replace the stainless steel cartridge is once its efficacy level becomes relatively low.
For more china gas spargerinformation, please contact us. We will provide professional answers.
You can as well change it when some of its parts are damaged.
On the other hand, the best time to clean this device is when impurities trapped from fluids clogs it.
Before embarking on cleaning this device, you ought to know the specific type of cleaning technique that you’ll use.
The most common cleaning techniques include;
You also need to have a powerful cleaning agent as well as a highly effective water-based agent free from chloride ions.
So when cleaning, ensure that you check the differential pressure is low to avert accidents as a result of dismantling from occurring.
The second stage involves placing the device in a nitrogen protection furnace, then heating it to a temperature around 380°C for about two hours continuously.
Then remove the device and allow it to cool to the desired temperature the place it in ultrasonic cleaning slot of the machine that has a strong cleaning detergent.
This is where the cavitation of the filter and cleaning detergent easily penetrate the device from each corner.
All the dirt disappears once you take it through this particular process.
Then you can use water to rinse the cartridge to eliminate the residues.
After that, use a blow dry for about 20 seconds to dry out the moisture in the filters.
Alternatively, you can dry it at a temperature of about 50 degrees Celsius.
https://youtu.be/4uayzBzhfZg
Back flushing refers to the process of cleaning a filter cartridge that can be re-used due to its working condition.
It helps in pushing off the contaminants which have settled on the surface hence increasing the efficiency and durability of the cartridge.
It will depend on how frequently you use the stainless steel filter.
Also, the type of fluid, temperature, type of material, pressure and contaminants will also determine the service lifespan of the stainless steel filter cartridge.
For example, you can replace swimming pool cartridge filter after 1 to 2 years. Assuming, they shall have served for about 2,000 hours.
First of all, ensure that all the systems are shut down to prevent anything from coming through for filtration during the changing process.
While at it, you may choose to clean the joining parts or better still decide to replace them with the filter cartridge.
After that, you can now bring the new stainless steel filter cartridge and position it at the right point.
Also, note that the new cartridge filter has to be of the same size as the one you are replacing to fit easily into the system.
To prevent immediate and future accidents from occurring, ensure that you check and confirm everything is okay.
Technical drawing of cartridge filter
Definitely you can.
As long as you provide all the necessary requirements that are also within the standards of the industry
You get a free sample for the particular type of stainless steel cartridge filter that you need.
All you have to do is make a sample request on the website.
Alternatively, you can contact our direct sales representatives to recommend an ideal sample for your application.
The number of days is dependent on your physical location and whether or not the device is customized.
Nonetheless, there is also another option which you can opt for standard and non-expedited delivery.
So it is upon you to decide on the most suitable delivery method for you.
By sending an email or making a call to the ever-present support officials who get back to you instantaneously.
Detailed Product Description
Metal powder sintered porous material is made of metal or alloy powder by forming and sintering at high temperature and with a rigid structure. Production Steps: Filtrate-- Isostatic compaction--Vacuum sintering
Feature: the material contains a large number of connected or semi-connected pores, the pore structure is composed of regular and irregular powder particles, the size and distribution of pores and the size of porosity can be adjusted according to the powder particle size combination and preparation process to meet the actual needs of customers.
Advantage: 10" Long 5um Medical Situation Titanium Sintered Metal Filter Elements For Chemical has good permeability, pore size, and porosity are controllable, shape stability, high filtration accuracy,wear-proof, good mechanical properties, good thermal conductivity, heat resistance, heat dissipation performance, backflush, and reuse.
Powder Sintered Filter Elements Specification Material OD Penetrability Wall Thickness Micron Rating Limited Pressure Connector Titanium Stainless Steel Nickel Baiss Φ18,Φ20, Φ25,Φ30, Φ40,Φ50, Φ55,Φ60, Φ70,Φ75, Φ80 3-800m3/m2hKpa 2.5-3mm Titanium: 5-100um Stainless Steel: 0.5-100um 2.5-3 Mpa M20, M30, 222, 226, NPT, DOE
Production Range Of Metal Sintered Products Material Filter Rating Porosity Penetrability Working Pressure Operating Temperature Production Specific Surface Area Stainless Steel Powder 304, 316, 316L 0.5-100um 30-45% 3-1300m3/m2hKPa 2.0-3Mpa 600℃ Plate, Disc 10-40cm2/cm3
Available Size Range Of Metal Sintered Products Product Max Length(Diameter) Width(Diameter) Thickness Range Customized Sintered Porous Plate 800mm 300mm 0.5-2.2mm Yes Sintered Porous Disc 300mm 300mm 0.5-2.2mm Yes
Properties Of Titanium Filter Elements And Materials By Isostatic Compaction Type Particle Size Value Of Barrier In Liquid um Relative Air Permeability m
3
·(h·kPa·m
2
)
-1
Compressive Strength Mpa Filt Efficiency 98% Filt Efficiency 99.9% FTD01 1 3 ≥5 ≥3.0 FTD03 3 5 ≥8 ≥3.0 FTD05 5 10 ≥30 ≥3.0 FTD10 10 14 ≥80 ≥3.0 FTD15 15 20 ≥150 ≥3.0 FTD20 20 32 ≥200 ≥2.5 FTD35 35 52 ≥400 ≥2.5 FTD60 60 85 ≥600 ≥2.5Corrosive Liquids And Gases
Food And Beverage Processing
Catalyst Recovery
The Medical And Chemical Industry
Properties of titanium sintered porous materials:
Properties of stainless steel sintered porous materials:
Properties of nickel sintered porous materials:
FAQ:
1. Quality Control
From the purchasing of the raw material to the warehouse of finished products, Along always have professional technical support, at every link, the quality problems will not have happened.
2. Price Control
The price of Along is not the cheapest, but we are trying to make it competitive to help customers save money.
3. Experience
Along has more than 10 years of export experience and the customers cover dozens of countries, around the world.
4. R&D
The engineers have more than 20 years of researching and producing in SOE, simultaneously, Along puts in the large budget in new products researching every year. And has several times of experience finish the project with customers.
5. In time
A reasonable production arrangement and nice teamwork with forwarder make sure customers get the goods at the scheduled time.
6. Customer service
Along has a professional before-sale and after-sale service group, make a sure reply in time and accurate response.
Are you interested in learning more about metal spargers? Contact us today to secure an expert consultation!